![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
4descort
Join Date: Jan 2008
Location: Brisbane
Posts: 17
|
Hey all,
My quest for a carbie upgrade still continues and just for the sake of it I'm going to try the 350 Holley on my worked 2 litre. I don't have the money right now for sidedraught webers and don't plan on having any amount $$$ soon. So the 350 looks like its worth a trial. Now to what i need to know. JETTING - what sizing should be appropriate? Even if you guys can tell me what DIDN'T work it'll still be of some help. If you need any more info on my set up let me know. I've had mixed reviews from people :togo: - some hate holleys others love them. My engine (when it was in it's original RS2000 and original owner) was running a 350 and it was beautiful. Thanks again, :voldar02: 4descort
__________________
Escort. Get there. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
nitroman
Join Date: Jun 2006
Location: Young
Posts: 322
|
It's very hard to accurately guesstimate jetting for any engine without knowing it's breathing capabilities. I think you should fit the carby with the jets supplied and run it on a dyno/gas analyser and set it from there. A few bucks invested in the initial tune will save you a lot of greif.
__________________
AU1 XR8 E303 cam,Crane Rockers,Crane double valve springs,Rollmaster roller timing gears,Crow +80" pushrods,SS cold air induction, 2 1/2 inch custom exhaust,Capa flash tuner.KONI shocks. EF fairmont wagon. GASGAS 400 enduro. Honda hr192 mower |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Pushrodosaurus Rex
Join Date: Dec 2007
Posts: 239
|
^^^^ what he said. It might cost you a couple of hundred to have it professionally tuned, but you only have to have it done once every year or more and the money you spend on tuning will greatly save fuel economy. Most people have their cars just a bit too rich. Have it done by someone with a gas analyser would be perfect. Most good carby specialists have them.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
4descort
Join Date: Jan 2008
Location: Brisbane
Posts: 17
|
Hey that sounds like the go then -
DOes any one know what accelerator cable I need for the HOlley? Fairly sure the standard won't fit so any suggestions there would be appreciated. Thanks a lot keep the suggestions rolling in!
__________________
Escort. Get there. |
||
![]() |
![]() ![]() |