|
17-08-2011, 04:56 PM | #1 | ||
Starter Motor
Join Date: Jan 2010
Posts: 21
|
Hi
I hope someone can help. I have an AU S1 Forte and need to replace the drivers seat belt, as it is stuck in the fully re tracked position. What I would like to know is if AU II / III belts can be used. I'm not to fussed about the colour. Cheers Rick |
||
17-08-2011, 05:26 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
no the S2 are height adjustable and the fitment is different
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
17-08-2011, 06:49 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
|
sometimes if you undo the bolt that holds the belt to the floor or inner sill, even the top bolt on the 'b' pillar
you can feed a little more belt into the retractor and it may release worth a try anyway
__________________
Money Talks, but all i ever hear is it saying Goodbye!! |
||