|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-09-2009, 08:58 AM
|
#1 | ||
|
too many fords
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
|
How do I install new superpro bushes in my lower control arms? theres 3 pieces per side but I cant work lout how they go. can someone help? Do I need to keep the steel shell from the old bushes?
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe. Daily driver 2: Nissan gq patrol Project 1: XP ute, 351W, c4, 9inch Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C. |
||
|
|
|
10-09-2009, 12:00 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
|
Did the new bushes come with new crush tubes? I'm not sure about fitting but on a x series falcon a press is the way to go. Make sure you use the high temp polyurethane grease.
AZZA |
||
|
|
|
|
10-09-2009, 12:01 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
|
By the way how much did it cost, i was quoted something ridiculous the other day.
AZZA |
||
|
|
|
|
10-09-2009, 01:03 PM
|
#4 | ||
|
too many fords
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
|
Yeah I got new crush tubes. I'lll think these are a bit different from X-series ones. These are for AU and there is 3 pieces of poly and a crush tube. I'm guessing that the cog bit goes in the middle then the other 2 bits are held in place by the crush tube.
I got these off another forum member, but I got qouted for nolathane ones from pedders for $315 just for lower control arm to suit AU
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe. Daily driver 2: Nissan gq patrol Project 1: XP ute, 351W, c4, 9inch Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C. |
||
|
|
|
|
10-09-2009, 04:32 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
|
Lowers from Super Pro were 210 where i am, i thought that was dear.
AZZA |
||
|
|
|
help with new bushes.
Linear Mode
