|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-08-2007, 12:25 PM
|
#1 | ||
|
Focus Rookie
Join Date: Jul 2005
Location: Sydney
Posts: 518
|
__________________
04' Panther Black Focus Zetec Custom Euro Plates, ST side indicators, MK2 Badges, ST Snorkel, White 17"s, Exhaust, Springs, Volant Intake,Angel Eyes, Body Kit, St170 Lower Grill, F/C Throttle Body, DBA slotters |
||
|
|
|
17-08-2007, 12:39 PM
|
#2 | ||
|
Guest
Posts: n/a
|
Asking a bit much IMHO. Although new etc; getting one from a low km wrecked escape/tribute could be a LOT cheaper. Not sure if this has VCT or not.
If the latter, perhaps its a straight dropin to replace the 2.0L Also the ebay article says that its good for supercharging/turbo over the 2.0L; the 2.3L has weaker rods over the 2.0L and where the 2.3L can only take 7-8PSI stock safely, the 2.0 can handle 10-11PSI. |
||
|
|
|
17-08-2007, 12:55 PM
|
#3 | ||
|
Old enough to know better
Join Date: Apr 2005
Location: Melbourne
Posts: 2,311
|
Also probably doesn't come with an ecu, and if it did would be tuned differently to a Focus.
Would be interesting to find what a wrecker would charge for a Mazda SP23 engine. Was probably for a Caterham type project...Backed out because it was all too hard with an escape engine?????????
__________________
Manual 2003 Machine Silver 5 Door LR Focus Zetec. Mods: Ford Racing CNC'd cylinder head milled .040", 3 angle valve grind. Ford Racing Stage II camshafts. Ford Racing cam gears. Ford Racing long tube header. Random Technology hi flow cat. Herrod 2.25" stainless cat-back. Pipercross Viper intake. CFM 65mm throttle body. 2000 ported intake manifold. Herrod Custom SCT tune. Eibach suspension. Quaife ATB diff. Wilwood 13" brakes. Custom ST170 leather interior. www.cardomain.com/ride/2773918
|
||
|
|
|
|
17-08-2007, 01:12 PM
|
#4 | |||
|
Guest
Posts: n/a
|
Quote:
If you tried to put the Mazda SP23 engine and its ECU into the LS; the ECU wouldn't match the igntion barrel/key transponder/BEM?. You'd need their ecu as well and possibly the engine loom to be able to control the VCT. |
|||
|
|
|
17-08-2007, 04:47 PM
|
#5 | ||
|
Mr Focus
Join Date: Mar 2006
Location: Brisbane, southside, Redlands.
Posts: 575
|
If your looking to mod this engine, Mazda SP23 and Focus 2.3L USA have some different engine parts.
__________________
Cosworth: 2.5" high flow exhaust system, piston & rod 8.5.1 Ford Racing: Tail lights, engine cover, racing wing, cnc'd head, manifold, 70mm tb. Lentech: Torque Convertors with 23 spline input shaft, valvebody Oz racing: WRC OBX: 4-2-1 race header SCT: xcal3, dash scan. |
||
|
|
|
eBay: 2.3L Duratec Engine
Linear Mode
