Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 07-05-2012, 01:18 PM   #1
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Water water everywhere? Another leaking ford?

http://www.youtube.com/watch?v=63k7ocnO6Do

It seems to be coming from the join in the two panels, but the join isn't visible from under the bonnet...

any one have any suggestions?

another video, found a water drop.

http://www.youtube.com/watch?v=xrNN-Sy5QxY

TheyDontWantMus is offline   Reply With Quote Multi-Quote with this Post
Old 08-05-2012, 12:30 PM   #2
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Re: Water water everywhere? Another leaking ford?

I believe this is happening..

the passenger side air vent, that ducts from the plenum chamber into the cabin passes through two layers of metal, the plenum chamber, and the firewall.

it has a foam seal on a flange on the inside of the cabin, which is meant to seal to the firewall. it also has a "hood" in the plenum to stop water running into the vent.

problem is, the hood catches and directs water back towards the firewall, where it then runs around the plastic duct, into the hole, and down between the two layers of metal (the firewall and plenum chamber) and into the cabin.

it appears that to remove the duct and seal it properly, will require me to remove the entire dash board...

I guess it is a 23 year old car, but it would have been nice if they could have used sealant to begin with, instead of a foam gasket thats basically non existent now.
TheyDontWantMus is offline   Reply With Quote Multi-Quote with this Post
Old 08-05-2012, 02:18 PM   #3
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Re: Water water everywhere? Another leaking ford?

pulled the dashboard out far enough to get the duct out, going to seal it with a stack of sealant, and hope it fixes it.

Now that the duct is out, I'm not entirely sure that was the issue...
TheyDontWantMus is offline   Reply With Quote Multi-Quote with this Post
Old 08-05-2012, 02:20 PM   #4
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Re: Water water everywhere? Another leaking ford?

TheyDontWantMus is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL