|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-08-2016, 07:41 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
i have changed the battery on my remote and works acept you have to keep pressing the unlock button several times in different positions for it to work do i need a new shell or a whole unit and are all au sedans the same. i will say the battery i installed was a used one but all the other buttons work good thanks
|
||
|
|
|
26-08-2016, 05:55 PM
|
#2 | ||
|
Guest
Join Date: May 2013
Posts: 1,934
|
Chances are when you changed the battery, you bumped something on the circuit board.
I've got 2 remotes, one 5 year old & one original. I've had to re solder the battery section back onto the circuit board a few times on both remotes, & the original one (2000) actually had the tiny buttons fall off the circuit board. ...& by some small miracle of engineering I managed to solder the buttons back on too. I'd say you have a similar problem. If you find a broken connection on the circuit board, the trick is to isolate which connector & then solder it from the under side of the board. You may just need to touch the soldering iron to the connection for a few seconds, without adding extra solder. |
||
|
|
|
|
26-08-2016, 08:35 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
i know what your saying but thats not the case ive had that happen before and replaced the keypad
|
||
|
|
|
|
27-08-2016, 08:52 AM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,482
|
Quote:
__________________
 HI  I'M MICHAEL  2003 ACID RUSH BA FUTURA WAGON  light up window switches | auto on cruise control | doubleclick window lift from remote |
|||
|
|
|
|
27-08-2016, 09:28 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
all buttons feel the same i will try your idea also blow it out with a air hose,you could be right.i had a problem with the electric drivers window switch which stopped working and a mate pulled it apart and it was full of crap and now works perfect thanks
|
||
|
|
|
|
28-08-2016, 06:39 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
all fixed i put a tiny thin square piece of cardboard behind the button and in between the circuit board which made the button firmer
|
||
|
|
|
| This user likes this post: |
|
31-08-2016, 04:46 PM
|
#7 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
Yes, the tiny piece of cardboard/folded paper is a good trick.
The actual buttons on the circuit board lose their springiness over time and need quite the thumbnail jab to depress, so a little bit of something under the gel button works wonders. /edit: woo 10 year badge :S
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
02-09-2016, 06:28 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
yes the thumbnail jab was giving me a sore thumb
|
||
|
|
|
| This user likes this post: |
keyless remote
Linear Mode
