Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 24-10-2010, 11:41 AM   #1
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default Changing The Millage Numbers

Hi All

i have a v6 essex capri.and its on the way to be completed thank god for that...phewwwwwww
iam working around the interior part now and i like to move all the millage numbers to 0000000 cause its a new motor and all ..
does anyone know how to do it .or is there specail people to do this work .....iam in brisbane if that helps ...
and now i know whys it has been not going strait at all its stuck on 666982 the first three numbers specks for it slelf ..
please keep me posted on this

cheers

gerry

WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 24-10-2010, 12:11 PM   #2
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

You can dismantle the tumbler assembly from inside the speedo housing and then manipulate the wheels manually to place them anywhere you please. It's fiddly but patience and perserverance will see you through. Sorry I can't be specific on details of how to disassemble as it has been probably over 30 years since I did one. Just start undoing all the little screws on the back of the housing till it comes apart.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 24-10-2010, 02:15 PM   #3
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

ill try it out during the week see how i go...then people will start calling me fingers..hahahahahahaaha
WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 24-10-2010, 09:17 PM   #4
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

there is a place on Evans road @ Salisbury/Moorooka that reco all types of guages and can reset the odo to 0000 and supply a Qld Dept. of Trans worthy letter to validate the original miles and work completed.

I had my whole Xt cluster re-done by them and the workmanship was worth every cent...


If you are interested I can try and track down some contact details....
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 24-10-2010, 10:18 PM   #5
wombat2509
Regular Member
 
wombat2509's Avatar
 
Join Date: Apr 2009
Location: north coast N.S.W.
Posts: 63
Default

Lionel Otto Instruments are at

124 Evans Road, Salisbury Queensland 4107
Phone: 3277 3888 Fax: 3277 8520 (STD: 07 - International Dial: +61 7)
Email: contact@ottoinstruments.com.au

they have good reviews
wombat2509 is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2010, 09:16 AM   #6
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

Quote:
Originally Posted by wombat2509
Lionel Otto Instruments are at

124 Evans Road, Salisbury Queensland 4107
Phone: 3277 3888 Fax: 3277 8520 (STD: 07 - International Dial: +61 7)
Email: contact@ottoinstruments.com.au

they have good reviews
thats them .. well done wombat
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2010, 09:09 PM   #7
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 21,831
Default

I got another cluster on ebay for my TF Cortina.

I tried to move the tumblers but it ended up a mess.

You may have more luck ;-)
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2010, 11:47 PM   #8
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

hi all

just like to keep you all posted .i gave it a go my self and it worked i pulled apart from the back and then took the tumbler out and spun them around to ..0000000 ..
i hope its ok to do that .now i just read i need to take the old numbers down for main roads ...
i am confussed on this matter
iam i going to get into trouble for what i have done

WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 26-10-2010, 06:12 PM   #9
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 21,831
Default

Dear Mr Main Roads........

Being serious for a moment, and putting my bush lawyer hat on, I'd say that it is not on.


See this...

‘Tampering with odometers
‘59A.(1) A person must not tamper with a motor vehicle’s odometer
with intent to falsely represent that, at a particular time, the vehicle had not
travelled more than a specified distance.
Maximum penalty—100 penalty units.
‘(2) If a court finds a person guilty of an offence against subsection (1),
the court may, on its own initiative or on the application of a person who
has suffered loss, order the person who committed the offence to
compensate for loss resulting from the commission of the offence.
‘(3) In any proceeding, the distance shown at any time on the odometer
tampered with is evidence of a false representation by the person who
tampered with the odometer that the vehicle had not travelled more than the
distance shown on the odometer.
‘(4) Subsection (2) does not limit a court’s powers under the Penalties
and Sentences Act 1992 or any other law.
˙

Last edited by Cav; 26-10-2010 at 06:21 PM.
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 26-10-2010, 07:24 PM   #10
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

You tell them you bought a NOS speedo because yours ceased working. You tell them the old reading and tell them you dumped the speedo into the bin months ago because you didn't know you had to keep it (if asked). They will possibly give you a certificate with the old mileage on it that you have to keep with the car in case it is ever sold.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 26-10-2010, 10:27 PM   #11
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

Quote:
Originally Posted by T3man
You tell them you bought a NOS speedo because yours ceased working. You tell them the old reading and tell them you dumped the speedo into the bin months ago because you didn't know you had to keep it (if asked). They will possibly give you a certificate with the old mileage on it that you have to keep with the car in case it is ever sold.
+1 for good advice... the motor might have 0000 on it, a full resto for example but as far as Qld Transport is concerned the car will have alway done xxxxx klms...


You want to keep the odo @ 000 in line with the mechanical compontents but not seem like you are selling an 'only on Sunday to church' seventies buggy with no milegae on the chassis..

Be up front and truthfull, your speedo gear had stopped, you had to get a new unit but you know the car has done "x" klms and Qld transport will verify it.

PS they already know by backtracking the rego and any RWC's if you whip a few thou off it :P
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 27-10-2010, 02:09 AM   #12
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

so am i in deep pooo or what.....
WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 27-10-2010, 06:42 PM   #13
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

Not if you do what I said - they will accept your honesty in not trying to hide the correct reading.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 27-10-2010, 06:52 PM   #14
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 21,831
Default

You will notice the words INTENT TO FALSELY MISREPRESENT are used.

If you amend another speedo to your original mileage on your car then your intention is NOT to falsely misrepresent.

That'll be $20 ;-)
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 27-10-2010, 11:52 PM   #15
cosworthfreak
Regular Member
 
cosworthfreak's Avatar
 
Join Date: Oct 2006
Location: Canberra region
Posts: 352
Default

What Cav said.

You adjusted the speedo without any intention to mislead anyone as to how many km's are on the car. If you ever sell it someday, tell them it's been around the clock 3 times or something, and that you reset the odometer when you rebuilt the car. That's not misleading anyone.

Anyone trying to prosecute you would have to be able to prove your intent to mislead someone, and I think they'd have a hard time.


Cheers
Jamie
cosworthfreak is offline   Reply With Quote Multi-Quote with this Post
Old 28-10-2010, 06:50 PM   #16
JamesR
FF.Com.Au Hardcore
 
Join Date: Jun 2006
Location: Traralgon, Vic
Posts: 577
Default

Gerry, dont stress.
my Escort one only goes to 99,999.
if anyone questions it, tell them its ticked over.
__________________
1977 MkII Escort Ghia.
2006 MY07 Subaru Liberty GT Spec B wagon.

my photo blog;
http://www.jamesruff.net
JamesR is offline   Reply With Quote Multi-Quote with this Post
Old 28-10-2010, 08:06 PM   #17
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

So how then does he expalin that it's done 333018km (or is it miles) while being off the road for repairs since the last rego?

I think someone might smell a fish.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 28-10-2010, 11:13 PM   #18
cosworthfreak
Regular Member
 
cosworthfreak's Avatar
 
Join Date: Oct 2006
Location: Canberra region
Posts: 352
Default

I'm not sure about who holds what odometer readings, so I can't comment on that. I would have thought that, given the age of the car, most people would assume it's done a few miles. It's not like he's trying to make out that the car is an original low mileage example or anything.

I'm not sure what you'd do in his situation, perhaps if he had to put the old reading back on he could request a copy of the last rego papers from QLD roads.

Do you remember the old odometer reading Gerry?

Has anyone ever swapped a faulty speedo/instrument cluster and had any subsequent issues when getting new registration?


Cheers
Jamie
cosworthfreak is offline   Reply With Quote Multi-Quote with this Post
Old 28-10-2010, 11:59 PM   #19
geckoGT
Ich bin ein auslander
 
geckoGT's Avatar
 
Join Date: May 2005
Location: Loving the Endorphine Machine
Posts: 7,453
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always level headed and i notice him being the voice of reason when a thread may be getting heated 
Default

Also how are they going to know how many k's are on it since the last rego? In QLD you do not have to declare odometer readings when renewing registration, QLD transport have no idea how many K's are on my cars, they have not seen the Mini in at least 4 years.
__________________
Growing old is compulsory, growing up is optional!
geckoGT is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2010, 11:03 AM   #20
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

well i think there was about 666961 on the clock ..and as i said i was very anyoyed with the thripple 666 there ..hahahahahahaha
well i will see ..i just dont want a fine more money..$$$$$$$$$$$
WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2010, 11:04 AM   #21
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

but also the car has not been rego on it for at lest 10 years......
WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2010, 11:16 AM   #22
geckoGT
Ich bin ein auslander
 
geckoGT's Avatar
 
Join Date: May 2005
Location: Loving the Endorphine Machine
Posts: 7,453
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always level headed and i notice him being the voice of reason when a thread may be getting heated 
Default

I think the point here is as long as you do not try to deceive a buyer when you sell it and you keep a record of the true kms you will not have an issue. It will only become an issue if a buyer is told that it is a low km car and then they find out otherwise and lodge a complaint, then you are in a lot of hot water.

Do you have the original owners manual, why not record the date and reading of the change to the mileage on that?
__________________
Growing old is compulsory, growing up is optional!
geckoGT is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2010, 10:46 PM   #23
WOGBOY69
WOGBOY69
 
WOGBOY69's Avatar
 
Join Date: Nov 2007
Location: brisbane
Posts: 790
Default

no books what so ever in the car...hmmmmmm
WOGBOY69 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:06 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL