|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
23-09-2016, 02:20 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2016
Posts: 6
|
sorry to bother but started an old au this morning after a long sit and a mild port on the throttle and she started straight up and idled good but im a gronk and pulled throttle wires gave a tap and replaced wires and now it idles at 2200 and 19 when i pull wires again.
i have searched for remedy but only find relearn but i cant drive her yet and at 2200 revs not really an option and the idle is tight and wont let me move it back down onto base screw. Do i just remove battery for an hour and push back down onto screw?? Allso hesitates on throttle and my ebay ob2. reader is junk and wont link so how to get codes with a wire please and any advice thanks very much. |
||
|
|
Au1 idle reset
Threaded Mode