|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-03-2018, 05:03 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 540
|
Guys,
Can you replace the outer toe link ball joint, as well as the toe link inner bush or the whole toe link needs replacing because the ball joint can't be replaced? Cheers |
||
|
|
|
27-03-2018, 11:04 PM
|
#2 | ||
|
Regular Member
Join Date: Feb 2010
Location: Melb
Posts: 167
|
The ball joint is part of the link arm. They are cheap on evilbay though, ~$60/pair for cheapies which should be ok as they don't carry much load.
If the joint itself is ok and just the usual torn boot you can pinch the boot from a new one and repack with clean grease. I have found they are a real pain to dislodge. I recommend one of these to make the job much easier: http://www.supercheapauto.com.au/Pro...parator/377217 |
||
|
|
|
|
28-03-2018, 12:02 AM
|
#3 | ||
|
2009 xr turbo,2004 fiesta
Join Date: Oct 2017
Location: Perth wa
Posts: 662
|
I have ebay toe links on my s3 xr8 and they are perfectly fine,i didn't get the cheapest ones,i got the ones from Suzuki spares I think,i think they had the best feedback,i couldn't get them locally in perth at the time.
|
||
|
|
|
|
28-03-2018, 04:02 PM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 540
|
Quote:
Is that price for the toe rod or the ball joint? If it is the ball joint can you send me the link for the company, please. Cheers |
|||
|
|
|
|
28-03-2018, 04:06 PM
|
#5 | |||
|
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 540
|
Quote:
Regards |
|||
|
|
|
|
28-03-2018, 04:38 PM
|
#6 | ||
|
2009 xr turbo,2004 fiesta
Join Date: Oct 2017
Location: Perth wa
Posts: 662
|
No the balljoint is part of the toe link,its all one unit,i can confirm this,only did mine a few months ago.
|
||
|
|
|
|
28-03-2018, 04:47 PM
|
#7 | |||
|
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 540
|
Quote:
|
|||
|
|
|
|
29-03-2018, 02:21 AM
|
#8 | ||
|
T-Series Club Member Vic
Join Date: Aug 2011
Location: Melbourne (South-East)
Posts: 2,756
|
The toe control outer sections you replace as units which incorporates the tie rod ends.
The inner sections you reuse as they have a replaceable bush. |
||
|
|
|
| This user likes this post: |
AU XR8, series 3 IRS
Linear Mode
