Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 27-08-2010, 09:51 PM   #1
Travisty FTT
'06 Ford Territory Turbo
 
Travisty FTT's Avatar
 
Join Date: Sep 2008
Location: Toowoomba.
Posts: 452
Default AU Shaker kits from IPV.

Just going through a few old Ford Mags of mine and found a website that sells Shaker kits for AU S2 and S3's. They're from a company called IPV; I'm curious as to whether or not someone has one of these installed on their AU at the moment and would be willing to share pictures.

I've found one put on to a newer model Ford, but not an AU.



Travisty FTT is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 09:53 PM   #2
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

I am yet to see one on an AU...
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 09:56 PM   #3
Travisty FTT
'06 Ford Territory Turbo
 
Travisty FTT's Avatar
 
Join Date: Sep 2008
Location: Toowoomba.
Posts: 452
Default

Quote:
Originally Posted by KR1STO
I am yet to see one on an AU...
I might have to buy one down the track. They say they don't fit the S1 models, that would most likely be due to the bonnet, would it not?
Travisty FTT is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 09:57 PM   #4
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Did a bit of googling..
Here you go..
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 10:00 PM   #5
Travisty FTT
'06 Ford Territory Turbo
 
Travisty FTT's Avatar
 
Join Date: Sep 2008
Location: Toowoomba.
Posts: 452
Default

Quote:
Originally Posted by KR1STO
Did a bit of googling..
Here you go..
Cheers mate. I'm of mixed opinions; I like it, but at the same time, it kind of makes the car look a little busy.
Travisty FTT is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 10:19 PM   #6
Herrod Motorsport
www.sctflashtuning.com
 
Herrod Motorsport's Avatar
 
Join Date: Jan 2005
Posts: 3,142
Default

they are made in australia by performance shakers
__________________
Australia's No1 Ford Enhancement Specialist
103 Northgate Drive
Thomastown
VIC 3074

Phone: 03 9464 5100
Fax: 03 9464 5166
Herrod Motorsport is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:32 PM   #7
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by KR1STO
I am yet to see one on an AU...
There are a couple around. Zhodak and I fitted one to his AU Fairmont. None of this pipe into an airbox though - straight into the TB running the standard 9" round filter under the shaker.

Shaker on my XR8 is on the cards at some stage - just got to find one at a good price (<$300). But it will plumb into the GD air box. I had one on the NL 'lane too - easy enough to do.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:35 PM   #8
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Pics!!!!!!
I think I remember your lane...
Was a dark colour, Burgundy? maybe green? maybe blue? been a while
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:41 PM   #9
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by KR1STO
Pics!!!!!!
I think I remember your lane...
Was a dark colour, Burgundy? maybe green? maybe blue? been a while
Here's the NL with shaker. I still see it around (the guy that bought it lives one suburb away):


Trying to find Zhodak's - should have pics shortly.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:41 PM   #10
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Found a red xr on Carsales with a shaker..
LINKY!!
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:43 PM   #11
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Zhodak's setup:

Quote:
Originally Posted by zhodak
Last week I was asked to supply some under bonnet shots of the shaker install. Here's a few and two video clips of the shaker sucking







__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:46 PM   #12
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

I bet that has a great induction noise!!
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:47 PM   #13
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by KR1STO
I bet that has a great induction noise!!
Yep - still see that one around too. The hardest part of fitting the shaker, is having the guts to jigsaw the bonnet!
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:49 PM   #14
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

true... I guess its the same as doing a sunroof....
Although, you can always get a new bonnet..
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:52 PM   #15
zhodak
Shakern, not stirred
 
zhodak's Avatar
 
Join Date: Mar 2005
Location: Canberra
Posts: 709
Default

Quote:
Originally Posted by KR1STO
I bet that has a great induction noise!!
You bet it had a great induction noise. I could hear it about 30 mtres away, in a shop on a busy road. And the best part as JC would agree is that the intake manifold was ice cold on a hot day after a decent run. You could easily place your hand on the intake.

Here's another pic of the old girl

__________________
New toy, 2005 TX RWD Territory, Black, optioned with Ex JC Cross 5 19's soon to be matt black alloys in 19x8.5, cruise and tinted glass, tricky pedals, JVC Head Unit in the what use to be tissue holder, reversre camera, Ford window shades, JC sourced cargo blind, MOMO wheel (in black of course). MB Quartz 2 ways in rear doors and Precision Response 6" Kevlar splits in front doors, LED DRL's, fog lights with angel eyes and Castle Headers, Hurricane cat and XR8 Hotdog
zhodak is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:54 PM   #16
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Did you ever get a sound clip..?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:58 PM   #17
zhodak
Shakern, not stirred
 
zhodak's Avatar
 
Join Date: Mar 2005
Location: Canberra
Posts: 709
Default

Quote:
Originally Posted by KR1STO
Did you ever get a sound clip..?
Yep Unfortunately not the best sound.


__________________
New toy, 2005 TX RWD Territory, Black, optioned with Ex JC Cross 5 19's soon to be matt black alloys in 19x8.5, cruise and tinted glass, tricky pedals, JVC Head Unit in the what use to be tissue holder, reversre camera, Ford window shades, JC sourced cargo blind, MOMO wheel (in black of course). MB Quartz 2 ways in rear doors and Precision Response 6" Kevlar splits in front doors, LED DRL's, fog lights with angel eyes and Castle Headers, Hurricane cat and XR8 Hotdog
zhodak is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 12:01 AM   #18
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Good enough..
That would've sounded great at WOT!
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 12:12 AM   #19
sleeper393
Regular Member
 
sleeper393's Avatar
 
Join Date: Jun 2010
Location: melb , vic
Posts: 392
Default

any difference , between the shaker and normal cai mods. being directly into the throttle body less distance , colder air charge , etc etc.
__________________
IF YOU CANT FIX IT WITH A SCREWDRIVER OR SHIFTER , F%$K IT with a hammer - Light travels faster than sound.......this is why some people appear bright until you hear them speak!
AU SERIES 3 LIQUID SILVER
BBS MOTORSPORT RIMS , EIBACHS , BILSTEINS , CERAMIC COATED 4499 PACIE'S , 2.5 S/S GENIE SYSTEM , MAGNAFLOWS , METALCAT 200cpsi , CAI MODS
123.4 GROUND TEARING RWKW'S , LOL
sleeper393 is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 06:34 AM   #20
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

The benefits would deffinately been seen at the drags. As you gain speed, it starts ramming air into the throttlebody, kind of like a pound or two of boost as you get into the deep end. The only negative thing is that it is hard to tune, as you cant replicate the ram air on a dyno to the same extent, and variables like wind direction and everything will make a difference. Worst case scenario is that it could lean out a bit and ping at WOT over 140, but I dont see it becoming to much of a problem.
Find a price, I might be keen on one of these as well
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 07:07 AM   #21
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
Default

This looks awesome! Are they defectable tho? Stupid question I no
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 08:52 AM   #22
frd906
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
Default

Looks really good.
__________________
Welder/Fabricator at Beaudesert Exhuast

Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
frd906 is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 09:11 AM   #23
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Im pretty sure that they conform to most states in the way of things through the bonnet.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 09:17 AM   #24
Hords
Treasure your balls?
 
Hords's Avatar
 
Join Date: Jul 2005
Location: NW Melbourne
Posts: 2,570
Default

Quote:
Originally Posted by KR1STO
There is so much wrong with this photo...

plates,
351 badge,
superoo sticker,
oh, and...

Blueprint.................................
__________________
Meteorite T3 TS50 ESS
Hords is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 01:38 PM   #25
KOUPE76
OLD SKOOL BABY
 
KOUPE76's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 1,688
Default

Adams old ute - Nice and neat.
__________________
XB Sedan - Trick Mansweto built 351 3V Alloy Headed Cleveland,Demon Carby ontop of CHI Hi Rise Manifold - 600HP
83 F100 XLT - 351 Cleveland C6 Auto wrapped in Black snake skin vinyl, daily tow rig.

1976 XB GS COUPE (waiting to start the rebuild)
KOUPE76 is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 01:41 PM   #26
Hords
Treasure your balls?
 
Hords's Avatar
 
Join Date: Jul 2005
Location: NW Melbourne
Posts: 2,570
Default

Yeah, much better Mick.
__________________
Meteorite T3 TS50 ESS
Hords is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2011, 10:28 PM   #27
99AUXR
Brad
 
99AUXR's Avatar
 
Join Date: Jul 2010
Location: New Zealand
Posts: 5,827
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Installing starter motor advice on ba / bf 6cyc Falcon. 
Default

thread resurection, where did you get the shaker from??
__________________
Silhouette BF MKII F6
Plazmaman Intercooler Kit, ID1000, 34mm Internal Wastegate and Turbosmart Actuator, Tein Coilovers, Focal Audio, XXR 521 18x8.5 18x10
99AUXR is offline   Reply With Quote Multi-Quote with this Post
Old 07-03-2011, 07:23 PM   #28
AUIIPURSUIT
pursuit ute baby
 
AUIIPURSUIT's Avatar
 
Join Date: Jun 2010
Posts: 864
Default

mmm im wondering bout total costs of doing a shaker install myself, and what kind of power gains youre looking at...
__________________
my ride : AU xr8 pursuit ute
AUIIPURSUIT is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2014, 02:47 PM   #29
Henryf6
Regular Member
 
Join Date: Apr 2013
Posts: 48
Default Re: AU Shaker kits from IPV.

Quote:
Originally Posted by KOUPE76 View Post
Adams old ute - Nice and neat.
image
Anymore pics of this car? Looks tough as.
Henryf6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL