|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
27-09-2007, 03:48 PM | #1 | ||
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
A few weeks ago I cleaned my throttle body and IAC. Due to the gas mixer I took the TB off the manifiold to do the job. Ever since, the revs drop too low when coasting or braking to a stop, they drop to 400 rpm or less once the revs get down to 1000 or so, it's an auto BTW. On petrol the revs usually recover after stumbling a bit and it idles OK, but it stalls on LPG almost every time, consequently I have to remember to switch to petrol coming up to intersections etc. Have done ECU reset but no difference.
It seems almost as if the IAC is not opening quickly enough or is sticky. Is this possible, can I test it? What sort of life should I expect from an IAC? Mine has 320,000km up.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
28-09-2007, 12:23 AM | #2 | ||
Regular Member
Join Date: Aug 2007
Posts: 70
|
Pulled the manifold off? Is there an air leak or something?
|
||
28-09-2007, 05:51 AM | #3 | |||
Blown 5L coming
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
|
are you 100% sure that you put everything back on exactly the way it came off? earth strap on, all vacum hoses still connected, LPG feed line still in position.....that sort of thing. I would honestly go over it thoroughly to make sure everything is on properly before thinking about changing the IAC.
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;) NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com Quote:
|
|||
28-09-2007, 08:25 AM | #4 | ||
Regular Member
Join Date: Aug 2007
Location: Parramatta, SYD
Posts: 378
|
is IAC the same as ISC? my car do the opposite to your the rev jump to 1800rpm.
__________________
Many Thanks 2001 AUII Factory LPG Manual XL Styleside Box High series bonnet Clear Side Indicator K&N Air Filter BAXR6T Snorkle Low Fronts, Super Low Leafs |
||
28-09-2007, 08:30 AM | #5 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
if you pulled the throttle body off did you replace the gasket? you may have a leak there with it running listen carefully see if you can hear a sucking noise. pour a bit of water over the throttle body area and see if there is any change, if there is it is a vacuum leak
|
||
28-09-2007, 12:49 PM | #6 | |||
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Quote:
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
|||
28-09-2007, 12:51 PM | #7 | ||
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Double-checked connections etc yesterday, all good. Will do water test later today & see what happens.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
28-09-2007, 10:07 PM | #8 | ||
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Read this thread http://www.fordforums.com.au/showthread.php?t=114646 and remembered that it's not switching over cleanly to LPG when cold now like it used to. It takes a bit of a rev on petrol before switching over otherwise it stalls when the gas kicks in. Maybe time to clean out the converter, it's done 4 years and about 130,000km, can't complain too much.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
29-09-2007, 12:07 AM | #9 | ||
Regular Member
Join Date: Apr 2007
Location: Burpengary QLD
Posts: 365
|
The best way I know of if the ISC is working is to have the car running then unplug the ICS and if the car stalls it working if the car dosen't stall it not working.
__________________
Proud member of the All Ford Club of QLD _____________________________________________ 98 AU FORTE-Congo Green C2R body kit, 2 1/2 cat back Exhaust, Red Diamond 2800rpm stall converter BA front brakes, BA air box with pod http://www.aufalcon.com.au/cgi-bin/i...act=item&i=326 |
||