Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 24-10-2007, 08:42 AM   #1
whiskers
gone fishing
 
whiskers's Avatar
 
Join Date: Jul 2006
Location: Morayfield qld
Posts: 286
Question What to check if anything???????

G'Day all,
I have a 99 series 1 with 250k on the clock the old girl runs like a dream but has developed a couple of oil leaks. I know where they are so this is Just a quick Q&A, I have to replace my rocker cover gasket as that is where one of the leaks is, it is at the back left hand side, is there anything that I should check whilst the cover is off.

thanks in advance
Whiskers

whiskers is offline   Reply With Quote Multi-Quote with this Post
Old 24-10-2007, 08:56 AM   #2
sly
Sly like a G6
 
sly's Avatar
 
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
Default

See if there is any oil sludge buildup around the valvetrain or on the underside of the rocker cover
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring.

Sleeper, anyone?
sly is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2007, 07:54 AM   #3
whiskers
gone fishing
 
whiskers's Avatar
 
Join Date: Jul 2006
Location: Morayfield qld
Posts: 286
Default

thanks for the info Sly.
whiskers is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2007, 03:35 PM   #4
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Check if there is a leak from the cam chain tensioner as well ... at the front of the engine ... behind the power steering reservoir bracket ... on the driver's side of the engine ... this is another common place for leaks to occur.

While you have the intake off ... clean the throttle body butterfly and Idle Control Solenoid out with Carby Cleaner.

I am sure there's probably a few other little things that could be done as well ... I just can't think of them off the top of my head at the moment.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL