|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
13-02-2008, 05:16 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2006
Location: Bendigo, Victoria
Posts: 422
|
G'day people ....
I have a TF Cortina that i am messing around with as an entry level circuit race car (club level). Currently the car is a 250 xflow 4 speed B/W box and diff .... What I need to know is what do I need to change the car from a 4 stud pattern to a 5 stud pattern with front and rear axles ..... I also want to change from drums on the to discs .... All help will be greatly appreciated. Cheers Daryl.
__________________
Proud Member of the FPV & XR Owners Club of Vic can also be found at www.CVMotorsport.com
The new home of Motorsport in Central Victoria |
||
|
|
|
29-02-2008, 10:16 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Canberra region
Posts: 775
|
Well the front is easy as CRS and Hoppers Stoppers sell a kit to bolt Falcon brakes up.
With the rear you have a few options. 1/ fit a Centura diff 2/ re drill your axles and drums 3/ Get a Falcon diff narrowed. I would guess that if you used an AU diff you could get away with narrowing the housing 93mm per side and using the old left axle as the right axle and shortening the old right axle 186mm so paying for only one re spline. This is what I did with an XB diff for my Capri so the wider AU diff should come close to Cortina width. Youll have to do the measuring yourself.. |
||
|
|
|
TF 4 stud to 5 stud.
Linear Mode
