|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-04-2008, 06:05 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2008
Posts: 6
|
Hi,
I have an XR6 AUIII XR Ute 02 model. I seem to be having a strange problem with the clutch. After 30 min of so of driving I can’t change gears. Everything is fine before that. Just had the clutch cable replaced as I though it may have been worn. Reason I thought it was initially the clutch cable is because if I adjust the cable I can select gears again with no issues. However it will then happen again and so I just keep tightening the cable. This seem to start two days ago about the same time I noticed the clutch pedal return spring (attaches form the clutch pedal to the bulkhead) had broken. So I went to ford and replaced it, didn’t fix the issue, just had the clutch cable replaced and that doesn’t seemed to have worked either. Does anyone have any ideas on what it might be? I don’t have any strange noises coming from the gearbox and it works fine for awhile? Cheers |
||
|
|
|
05-04-2008, 11:27 AM
|
#2 | ||
|
Its gone V
Join Date: Sep 2005
Posts: 359
|
try getting under the car and looking at the gearbox, there will be a little black box on the passenger side, open that.
look at the thing that the clutch cable connects to and see if it is cracked or stretched, because a simular thing happened to me and it actually broke. |
||
|
|
|
|
05-04-2008, 06:22 PM
|
#3 | |||
|
Starter Motor
Join Date: Apr 2008
Posts: 6
|
Quote:
Cheers thanks SIKSIX I'll give that a go. |
|||
|
|
|
|
07-04-2008, 09:36 AM
|
#4 | ||
|
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,619
|
3 Common problems on fords with the cable clutch set up are as follows :
1.Where the clutch pedal pivots under the dash on the pedal box can crack. 2.The clutch fork is cracked 3.The firewall is cracked
__________________
 MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||
|
|
|
|
07-04-2008, 05:34 PM
|
#5 | |||
|
Starter Motor
Join Date: Apr 2008
Posts: 6
|
Quote:
I'm guessing the clutch fork is inside the gearbox/clutch housing? So would need to open the housing to replace it? Havent looked at the pedal box yet but will get in there with a flashlight tonight and see if I can see any cracks. Cheers |
|||
|
|
|
|
08-04-2008, 12:03 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 784
|
if you have extractors and the clutch cable is sitting to close to them .this will melt the inside of the cable and it will bind up.
also where the clutch cable go'es through the firewall can bend out of shape and the cable dosen't sit square on it.it cause the cable to wear on one side and bind /snap.if you pop the cable off the pedal and pull it through the firewall you'l be able to see if its been rubbing
__________________
au2 s i6 5 spd , au series 1 xr6 hp motor, cam advanced 5*,jmm cai ,topgun leads,pacey 4480's,3 inch cat,lukey 2 1/2 sports zorst and 3.89 lsd,standard ecu. current best,14.939 @ 93.17. |
||
|
|
|
XR6 AUIII Clutch Problem?
Linear Mode
