|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-01-2009, 12:31 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2009
Posts: 10
|
Hi all,
I have an Escort 1600, I want to change carby, but still use the standard manifold that comes with the standard issued Motorcraft carby. Is there any other carby that will fit it (the manifold) and that works well? Or should I just recon the Motorcraft. May look into a larger weber later on, but for now just want to keep things pretty simple. |
||
|
|
|
28-01-2009, 07:01 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2005
Posts: 556
|
What you need is a dual barrel weber and matching manifold for an Escort Ghia. They come up on ebay every now and again.
You need to change the manifold as they have a different bolt pattern. The used to be aftermarket adapter plates that you could bolt on but they weren't very efficient and you ended up just using more fuel for no extra performance. |
||
|
|
|
A suitible replacement for the Motorcraft Carby
Linear Mode
