Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 17-01-2012, 10:36 AM   #1
Dave_Obsession
Resident AFF detailer
 
Dave_Obsession's Avatar
 
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
Technical Contributor: For members who share their technical expertise. - Issue reason: Helpful and detailed posts on car care. 
Default OK so how badly did I get ripped off?

As I've noted in my build thread, just after the new year my front right wheel bearing seized up...so I acquired a couple of decent looking eBay ones for $50 from a parts place in Dandenong - free delivery and arrived the same day via courier!

Went down to a different mechanic than I usually go to - this place serviced my fianceé's car and they seemed pretty good, so I thought I'd try them out.

They charged me $150 to fit the bearing.

Now I didn't say anything, and (in hindsight stupidly) didn't ask for a quote beforehand...but I do know at my 'regular' mechanic, when the front left bearing got replace about 18 months ago (they supplied the part for $120), I was only charged half an hour labour (presumably for installation) - $45...

Is there some sort of 'minimum charge' workshops have (if so this place didn't advertise that fact), or have I been taken for a massive ride here???

__________________
No longer an 'active' detailer.
Dave_Obsession is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 10:59 AM   #2
Fev
FF.Com.Au Hardcore
 
Fev's Avatar
 
Join Date: Feb 2007
Location: Cattai, Sydney
Posts: 7,701
Default Re: OK so how badly did I get ripped off?

$150 is probably about right. Hour of labor+part.
__________________
1992 EBII Fairmont Ghia 4.0l <---Click for the Gallery!
Insta@mooneye_ghia
White on bright red smoothies with thick whitewalls. Cruising around to some rockabilly
Fev is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:00 AM   #3
poppa smurf
FF.Com.Au Hardcore
 
poppa smurf's Avatar
 
Join Date: Jan 2012
Location: outback S.A...hiding in a workshop
Posts: 3,513
Default Re: OK so how badly did I get ripped off?

not sure on minimum charge but the least I have been hit with is 3/4 of an hour x $120 PH = $90

Ford dealers!
__________________
---------------------------------------------------------------

G'day....I'm Dave, ...everyone calls me Poppa,..05.. B.A. Fairmont mark II...

may your day's be filled with smiles, your life be filled with love, may your children know nothing but happiness and joy, cherish the memory of those who strove before us for they cleared the way, spare a thought for those who serve we owe so much to so many, life and the freedom to enjoy it is a special gift that can be taken away far too soon!
poppa smurf is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:02 AM   #4
Dave_Obsession
Resident AFF detailer
 
Dave_Obsession's Avatar
 
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
Technical Contributor: For members who share their technical expertise. - Issue reason: Helpful and detailed posts on car care. 
Default Re: OK so how badly did I get ripped off?

Quote:
Originally Posted by Fev
$150 is probably about right. Hour of labor+part.
I supplied the part.
__________________
No longer an 'active' detailer.
Dave_Obsession is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:04 AM   #5
GreenR
FF.Com.Au Hardcore
 
GreenR's Avatar
 
Join Date: Aug 2010
Location: Melbourne
Posts: 1,580
Default Re: OK so how badly did I get ripped off?

Wow $150 to change a a front wheel bearing assembly? I would say that is expensive considering it is about a 20 min job.
GreenR is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:06 AM   #6
351p6replica
Banned
 
351p6replica's Avatar
 
Join Date: Mar 2011
Location: anywhere l park my car in victoria
Posts: 1,117
Default Re: OK so how badly did I get ripped off?

stike me dead mate , last time l fitted bearings to a clients car charged them 60 for fitting with all labour that is required an gave them the choice to get bearings from repco ,autobarn,supercheap auto an bursons in bendigo ,.$45 for 1/2 hour seems correct to me an l did $60 for hour as it was me on my own doing it . so yeah $15o labour seems a bit hi to me mate big time time. normally if l do a bearing l do both sides there an then like l just did to wifes upcomin 40th bday pressy
351p6replica is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:21 AM   #7
crakrz
T3 TE50 Blueprint
 
Join Date: Apr 2005
Posts: 934
Technical Contributor: For members who share their technical expertise. - Issue reason: Craig has shown and shared an outstanding amount of knowledge in the field of Tuning. Craig is only to happy to share with anyone that asks his knowledge on the EEC tuning system, in particularly in the use of Moates Quarterhorse and Binary Editor. 
Default Re: OK so how badly did I get ripped off?

A bit steep, me thinks. Just offer the mechanic a free detailing session, tell him you want to try out a new polish on his duco, I think it's called 'Autosol'.
crakrz is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:22 AM   #8
MADED-6
MADED.6
 
MADED-6's Avatar
 
Join Date: Jul 2005
Location: Werribee
Posts: 2,676
Default Re: OK so how badly did I get ripped off?

yeah it is very pricey as others have said.

on a hoist itd take like 20mins thats including setting it up on the hoist.

its just wheel off, brake caliper off, disc off, i take the abs sensor out just for safe keeping and then 4 bolts, clean the surface and torque it back up.
cheers josh.
__________________
TUFAU-8
Get Stroked.
AU Stroked 5.6L GHIA
MADED-6 is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:24 AM   #9
SSD-85
Donating Member
Donating Member1
 
Join Date: Aug 2006
Posts: 5,142
Default Re: OK so how badly did I get ripped off?

I think I was charged 120 for both fronts. So 150 for just one is a bit steep IMO.
SSD-85 is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:25 AM   #10
351p6replica
Banned
 
351p6replica's Avatar
 
Join Date: Mar 2011
Location: anywhere l park my car in victoria
Posts: 1,117
Default Re: OK so how badly did I get ripped off?

exactly how l do it up on a hoist unless they have lock nuts on you cant find the tool to get them off or a stuborn bearing that wont come out of rotar or off the spindle/shafft
351p6replica is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 11:29 AM   #11
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default Re: OK so how badly did I get ripped off?

Quote:
Originally Posted by crakrz
A bit steep, me thinks. Just offer the mechanic a free detailing session, tell him you want to try out a new polish on his duco, I think it's called 'Autosol'.
I've heard brake fluid gets scratches out pretty easily.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 01:18 PM   #12
zdenko
2002 XR6 VCT Owner
 
Join Date: Mar 2011
Location: Sydney
Posts: 51
Default Re: OK so how badly did I get ripped off?

Yeah 20 minunte job good luck with that. It will take a mechanic that long to do one side with no probelms and working really fast. It will take 5 mins just to drive car onto hoist, hoist up and hoist down alone.
I'd say 30 minutes would be more fair if they clean it up properly and actually use a torque wrench.
On mine which I did at home with dad, the bearings were pretty much welded on. My bearings were screaming when we changed them so had alot of heat help with the welding process.
To get it off we wrecked 2 cold chissels and also needed a angle grinder to put more slots in the thing to get it off. I would understand $150 if they went through what I did.

On the other side the price you got charged just for fitting one is over the top!!!
I would go back and ask if there were any problems and if not ask for a break down of the price.
__________________
SOLD: 2002 AU3 Falcon XR6 VCT on Impco Mixer Gas
Factory Leather and Towbar
Stock 17' rims Perfect After Fixing Myself
Air Hog Air Filter + 2.5 Inch Sterling Mandrel Bent Exhaust + Supercheap Oval Tip.
Carbon Fibre Style Vinyl Wrapped Roof and Boot
zdenko is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 01:19 PM   #13
raised by monkeys
FF.Com.Au Hardcore
 
raised by monkeys's Avatar
 
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,138
Default Re: OK so how badly did I get ripped off?

Quote:
Originally Posted by b2tf
I've heard brake fluid gets scratches out pretty easily.
i prefer natural products like egg whites.
__________________
cheers
Shaun

Current
SY FPV F6X Territory #214
Previous
FG MkII G6E Turbo built by Heinrichs Performance and Tuning
BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning

"Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger
raised by monkeys is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 03:46 PM   #14
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default Re: OK so how badly did I get ripped off?

zdenko has the most level-headed approach to this. We all have the notion that mechanics are in fact charging 1.5hours at $100 an hour for a 20min job - but it simply could well be the case that it did really take them an hour and a half of frustratingly hard work to get it changed really properly. we've all had those times working on our own cars - a job that should take only half an hour ends up taking four times as long just simply because of some pain in the **** little something that doesn't move or moves too much.

Let it slide brother, it ain't worth your time and worry to get upset with what is worst case scenario, about $70. That's less than a tank of fuel, and i bet you buy one of those almost every week. So a one off on an unknown on a seemingly job well done is not something to worry about.

IMO.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 04:04 PM   #15
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,146
Default Re: OK so how badly did I get ripped off?

The second you swipe your eftpos card to pay, that's you accepting the price.

I'd say there's no point going back to him and in future, making sure you get a quote.
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 04:17 PM   #16
Dave_Obsession
Resident AFF detailer
 
Dave_Obsession's Avatar
 
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
Technical Contributor: For members who share their technical expertise. - Issue reason: Helpful and detailed posts on car care. 
Default Re: OK so how badly did I get ripped off?

Quote:
Originally Posted by Peuty
The second you swipe your eftpos card to pay, that's you accepting the price.

I'd say there's no point going back to him and in future, making sure you get a quote.
As stated in my OP, I totally agree and I'm not going to be doing any complaining. I'm now just a bit curious as the only other time I've had a wheel bearing replaced it only cost $45 of labour as opposed to $150...I understand that sometimes jobs take longer than expected but even so...

But yes definitely lesson learned here...sometimes it's not the questions you ask but the questions you forget to ask that can matter most!

At the end of the day, car is fixed which is the most important thing.
__________________
No longer an 'active' detailer.
Dave_Obsession is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2012, 05:25 PM   #17
robbyj
Rob
 
robbyj's Avatar
 
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
Default Re: OK so how badly did I get ripped off?

could have been stuck on pretty hard.. could have been the apprentice doing it, taking longer, could just be the thought hmm here's a sucker.

if you went back there now they'd prob just take you for a story of why it took so long blah blah.

like you say the main thing is its fixed and you are now all the wiser.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw
Blueprint series 3 AU V8 manual
robbyj is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2012, 11:07 AM   #18
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,088
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: OK so how badly did I get ripped off?

Dave, my guess is that the inner race of one of the bearings got stuck on the axle stub, as it did when I did mine. Easily happens when the bearings are shot. If that is the case, the labour charged would be about right. I would not feel too ripped off, as this may have well been the scenario.

Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2012, 09:51 PM   #19
AU-Billy
Regular Member
 
Join Date: Dec 2011
Posts: 46
Smile Re: OK so how badly did I get ripped off?

Alot of work shops will bump up the charge of labor because you supplied the part, to make up for the profit margin had they supplied it.
AU-Billy is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2012, 11:56 PM   #20
j3t ute
shaggs
 
Join Date: Aug 2008
Posts: 917
Default Re: OK so how badly did I get ripped off?

bit off topic but what does autosol do to ur paint ?
__________________
Bf RTV Tipper :

Fg ute Play Car

HSV IVE JUST BLOWN ONE
j3t ute is offline   Reply With Quote Multi-Quote with this Post
Old 21-01-2012, 12:30 AM   #21
ronwest
All Bran = Regular Member
 
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: OK so how badly did I get ripped off?

Quote:
Originally Posted by j3t ute
bit off topic but what does autosol do to ur paint ?
It's a metal polish so would scratch it to buggery.
ronwest is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2012, 12:51 AM   #22
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default Re: OK so how badly did I get ripped off?

yes i think mine was nicely rusted on both sides when i did them, they ended up taking way more time than i would like to admit, i don`t even want to talk about the ones on the back
mik is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:56 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL