need some sound!! - Page 2

2002auxr6 · 22-02-2006, 11:12 AM

Quote:

Originally Posted by Casper

yes.
It will drone like a pig.

so it will soung really bad

Casper · 22-02-2006, 11:16 AM

Quote:

Originally Posted by 2002auxr6

so it will soung really bad

in an auto, 100kph, you will quickly find it gets VERY annoying.. untill your brain totally turns of from that frequency sound I guess.
I6's are prone to drone anyhow.. add the characteristics of an auto and remove the resonator and its going to sound crap IMHO. Each to their own but I wouldnt do it.

2002auxr6 · 22-02-2006, 11:30 AM

the systym, i just had put n is a 2 1/2 inch cat back redback exhaust, it has 2 centre mufflers and one at the back, is this right?? i was just on the phone to someone and they said it should have one in the middle and one at the back

Casper · 22-02-2006, 11:35 AM

It will have a Cat (that will sit closest to the engine), then a Muffler (mid way) then the resonator (right at the back). This is the normal AU setup. If you have a Cat, 2 mufflers and a resonator then get rid of one of the mufflers.

2002auxr6 · 22-02-2006, 11:42 AM

Quote:

Originally Posted by Casper

It will have a Cat (that will sit closest to the engine), then a Muffler (mid way) then the resonator (right at the back). This is the normal AU setup. If you have a Cat, 2 mufflers and a resonator then get rid of one of the mufflers.

that is what it has no wonder its so dam quiet, which muffler should iget rid of

JC · 22-02-2006, 11:45 AM

One of the ones in the middle. Pick one. It doesn't matter. Maybe the smaller one? Or maybe the bigger one?

2002auxr6 · 22-02-2006, 11:51 AM

Quote:

Originally Posted by JC

One of the ones in the middle. Pick one. It doesn't matter. Maybe the smaller one? Or maybe the bigger one?

ok the exhaust goes from 1 pipe into 2 pipes then back to one , should i get a whole new exhaust or just takeone of the centre mufflers out

Casper · 22-02-2006, 11:58 AM

Quote:

Originally Posted by 2002auxr6

ok the exhaust goes from 1 pipe into 2 pipes then back to one , should i get a whole new exhaust or just takeone of the centre mufflers out

Thats the stock VCT factory layout. Didnt you just say that you got it replaced with 2.5"? The factory layout is 2" and I've never heard of the same layout being created in 2.5" aftermarket. Is yours aftermarket?

2002auxr6 · 22-02-2006, 12:08 PM

Quote:

Originally Posted by Casper

Thats the stock VCT factory layout. Didnt you just say that you got it replaced with 2.5"? The factory layout is 2" and I've never heard of the same layout being created in 2.5" aftermarket. Is yours aftermarket?

yeah its a redback 2 1/2 inch after market one

Casper · 22-02-2006, 12:14 PM

ok, before the resonator at the back of the car do the 2 pipes rejoin as one or do they both go into the resonator and then come out as twin pipes?

2002auxr6 · 22-02-2006, 12:24 PM

Quote:

Originally Posted by Casper

ok, before the resonator at the back of the car do the 2 pipes rejoin as one or do they both go into the resonator and then come out as twin pipes?

it starts off with one pipe then goes to 2 with a muffler on each then joins to one the it has a muffler right at the back of the car

Casper · 22-02-2006, 12:34 PM

Quote:

Originally Posted by 2002auxr6

it starts off with one pipe then goes to 2 with a muffler on each then joins to one the it has a muffler right at the back of the car

The "muffler" right at the back is a resonator. Ok, so the pipes join back to 1 before the resonator. Whats the join look like? Is it a straight connection or does it have the appearence of a "H" shape where one is blocked off and there is a crossover join between them?

2002auxr6 · 22-02-2006, 12:46 PM

Quote:

Originally Posted by Casper

The "muffler" right at the back is a resonator. Ok, so the pipes join back to 1 before the resonator. Whats the join look like? Is it a straight connection or does it have the appearence of a "H" shape where one is blocked off and there is a crossover join between them?

r u talking about the pipe going to the resonator

XR6-VCT-2000 · 22-02-2006, 12:47 PM

i have the 'H' shape at the rear , im gathering this is the standard exhaust system for the vct .. y/n ????

Casper · 22-02-2006, 12:54 PM

Quote:

Originally Posted by 2002auxr6

r u talking about the pipe going to the resonator

yes

Quote:

Originally Posted by XR6-VCT-2000

i have the 'H' shape at the rear , im gathering this is the standard exhaust system for the vct .. y/n ????

yes, apart from some very early build AU1 VCT's