|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
16-09-2024, 02:01 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2020
Posts: 6
|
Got a little water in px3 on weekend on pass side , electronics started playing up after that steering , hill assist , cruise control , ESC , pulled seat our and found a modual on floor , xmckeaned and dried it , my question can this be the cause and what it called if I need to source another
|
||
|
|
|
16-09-2024, 08:05 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2016
Posts: 878
|
hi
Water ingress can fry electronics today and in the future . The future problems can be caused by moisture or developed corrosion over time . If your unlucky modules that are wired to the wet unit may fail in the future also . The wiring because companies use the smallest possible size can fail as moisture wicks itself up the cable from connector and corrodes wires internally . The signal or power flowing thru can be intermittent . Obviously the above issues can be difficult to diagnose . In a simpler car all the dash and engine loom is removed dried and lubed . All ECU are removed and dried . About 7 --10 days work . No guarantee . |
||
|
|
|
| This user likes this post: |
|
16-09-2024, 08:54 PM
|
#3 | |||
|
Experienced Member
Join Date: Sep 2006
Location: Australasia
Posts: 7,755
|
Quote:
As for your problems, maybe so or maybe not. |
|||
|
|
|
|
17-09-2024, 12:20 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,938
|
how and where? Ranger is rated to 800mm deep wading so all the critical electrical joints should be above that.
|
||
|
|
|
|
17-09-2024, 01:14 PM
|
#5 | |||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,055
|
Quote:
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
|||
|
|
|
| This user likes this post: |
|
17-09-2024, 03:01 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,938
|
well, it's 800mm at <7kmh, so pretty much immersion
|
||
|
|
|
|
18-09-2024, 10:49 AM
|
#7 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 353
|
No, not its not, you cannot park in 800mm water.
__________________
The Silver Bullet - BJ74 Where the actions at Ontrack 4wd Club https://www.facebook.com/ontrack4wdclub |
||
|
|
|
|
18-09-2024, 12:52 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,938
|
maybe OP can explain a little more?
|
||
|
|
|
Swamped ranger
Linear Mode
