Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 16-06-2006, 05:25 PM   #1
STK-XR8
Regular Member
 
STK-XR8's Avatar
 
Join Date: May 2006
Location: west of melb
Posts: 192
Default motorcraft carbie problems

need help plzzzzzzzz
xc 302 plenty of spark ,fuel ,timing set and cranks but wont fire up.
me thinkin too much fuel or any other ideas
where are the adjusting screws for the floats on the motorcraft carbies.

this motor was running 1 week ago now above happens when people wont to buy it running.

: :

thanks den

STK-XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2006, 06:03 PM   #2
banarcus
hmm eyebrows
 
banarcus's Avatar
 
Join Date: Jan 2005
Location: Lower Hunter Valley, NSW
Posts: 2,393
Default

What's a Carb????????? Seriously try spraying in some aerostart or start ya bastard and then turn over, at least this will let you know if it's a fuel problem. Don't spray in when turning over as you may blow yourself up.
__________________
XE 4.9 Falcon S & XA 4.9 Fairmont hardtop
banarcus is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2006, 08:45 PM   #3
Mutley
Regular Member
 
Join Date: Mar 2005
Posts: 176
Default

Sounds like a crook coil?
Mutley is offline   Reply With Quote Multi-Quote with this Post
Old 17-06-2006, 10:15 AM   #4
aquahead2001
FF.Com.Au Hardcore
 
aquahead2001's Avatar
 
Join Date: Jun 2005
Posts: 1,301
Default

I thought that XC V8's had Carter Thermoquads on them as did XD/XE? How long has the motor been sitting without going? If it's a long time (12 months plus?) you may have some stuck valves. The left bank on Clevelands would do this on occasion.

I bought an XD writeoff back in 1987 and for the life of me couldn't get the thing to run. I ended up ringing my uncle who was a just retired Ford Product Engineering Motor Technician and within 15 minutes of him arriving, he had the thing going.

I can't remember which valves, but there were a lot siezed on the left bank. He said that it was a common problem with clevelands and one that they would always look for first.

We ended up having a few bent pushrods, a valve guide that had broken off (motor was a ford rebuilt that had new pushed-in valve guides.) and about a gallon of petrol in the sump... Check your oil if you've been pouring petrol down the carb!

If you have spark, fuel there is only one other thing to look for, compression...
aquahead2001 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:51 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL