|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-05-2007, 03:39 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2007
Posts: 83
|
Hi all
I'm relatively new here and have an AUII XR8 220. I'm getting a new exhaust on Saturday and have sent my Flash Tuner back to CAPA for unlocking and installing of a generic tune. Thing is, they want the PCM code, a 4 character code, which is apparently on a sticker on the PCM. I've found the PCM in the LHS passenger kick panel, but its metal bracket is riveted in and I can't remove it. No sticker is obvious. 1. Does anyone know EXACTLY where the sticker is so that I could maybe find the code with a torch and dentist mirror? 2. Any other alternatives to drilling out the rivets in the bracket to drop the PCM and find this darned sticker? I've called a Ford dealer with my VIN, but they can't help. Thanks Mark PS - When all this is done, I look forward to reporting my results of a custom exhaust and generic edit! |
||
|
|
|
22-05-2007, 07:31 PM
|
#2 | ||
|
Back on the road
Join Date: Dec 2004
Location: Wollongong, NSW
Posts: 3,205
|
Its on the plastic connector that the loom plugs into.
I drilled out the rivet, and then ran a tap through it for a 1/2" (i think?) bolt.
__________________
------------------------------------------------------------------------- AU XR8 Ute 13.90 @ 100mph - http://www.aufalcon.com/xr8ute 5L Windsor, GT40X heads, Crane 2030, Pacey 4-1s, Lukey 3", 3.91:1, auto. Tuned by me w/Quarterhorse and BinaryEditor. Coming Soon: Ported lower intake, Tickford "Premium" Brakes, and a good wash. |
||
|
|
|
|
22-05-2007, 07:46 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
 
|
If you can get to a capa dealer with a data logger, they can access the code via the obd2 port.
What are Capa charging you to unlock it?
__________________
Pit Lane Performance 20 Rosella St Frankston 03 9783 8122 Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
|
||
|
|
|
|
22-05-2007, 09:27 PM
|
#4 | ||
|
Regular Member
Join Date: Mar 2007
Posts: 83
|
Thanks for your replies!
I found the code ("12RB") on the bottom of the PCM with a mirror which means I won't have to drill out the earthing rivet (photo attached of where I found the sticker - hopefully it'll help someone else). CAPA is charging me $75 to unlock and $75 to put in AU xr8 220 generic tunes. Good value and CAPA are good to deal with too. Some local performance shops were going to charge $175 just to send it back to CAPA directly to unlock (ie $100 for posting it!) Furthermore this dispels that a Flasher box locked to another car's VIN (my previous XR6T) needs to be sent back to SCT in America for unlocking. Still got 3 lives left for my BF XR6T (when I get it) and beyond! Mark Last edited by markxr6t; 21-03-2012 at 12:26 AM. |
||
|
|
|
PCM Code Sticker
Linear Mode
