|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-06-2007, 03:01 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2007
Posts: 2
|
Had auto service and tryed to start with flat battry and now wont go.
Wont crank. Wont fuel inject But does have spark (when forced to crank) Seems to me that the BEM wont talk to the PCM and thinks its stolen.. So I dont wont to tow it to ford and pay there outragiuos labour rate. Can I fix this my self.. Thanks in advance.. |
||
|
|
|
12-06-2007, 10:17 AM
|
#2 | ||
|
Moderator
  
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
 
|
weird ... if you are getting spark when cranking ... then the BEM hasn't immobilised your engine.
I think there's another issue here that is causing your vehicle not to start.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
12-06-2007, 10:23 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
What do you mean by trying to start with flat battery? did you try and jump start it?
|
||
|
|
|
|
12-06-2007, 10:23 AM
|
#4 | |||
|
Cuban... nothing like it
Join Date: Dec 2004
Location: Watching in amusement
Posts: 11,643
|
I have heard of an issue like this before, several attempts trying to start the car and the system locks out the key transponder
Why are you paying to get it fixed btw, seems like the people who did the service needs to carry the cost of repair
__________________
Quote:
|
|||
|
|
|
|
12-06-2007, 02:07 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
if you tried to jump start it off another car you may have fryed the ECU
|
||
|
|
|
|
12-06-2007, 02:58 PM
|
#6 | ||
|
Kick out tha Jams
Join Date: Mar 2006
Location: SA
Posts: 443
|
could it be something as simple as the ignition harnes plug being loose/unplugged?? I experianced something similar after my car was stolen, and the solution was simply to push the looms back into the BEM and the ignition plug back into the harnes as they were all loose (the thief tried to cover his tracks)
Also, check your battery connections, while it might have enough power going through to light up dash lights/interior light etc, if its loose, it might not flow enough current to crank, remove any corosion from the terminals and make sure thier done up real tight - these cars get very temperimental when the terminals are loose (even if only slightly)
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats! |
||
|
|
|
How do I reprogram BEM to transponders
Linear Mode
