|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-12-2007, 06:34 PM
|
#1 | ||
|
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
How do I go about removing the lock/actuator from the drivers side? There is an extra rod for the key. Anyone got any tips??
|
||
|
|
|
07-12-2007, 01:58 PM
|
#2 | ||
|
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
anyone?
|
||
|
|
|
|
07-12-2007, 02:15 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2007
Posts: 717
|
If i remember correctly, the metal stem that goes up to the barrel is locked in place by a plastic clip. One side of the clip is open, so all you have to do is push it away from the stem and it should come free. The second stem is held in place by the grey 'lock' button. To undo it , lower the door trim so that the whole 'button' is exposed so it can be twisted off. Make sure you check the button alignment when you put the trim back on, otherwise it may go down to far or stick up out of the trim (very annoying!)
Hope this helps 
|
||
|
|
|
AU actuators
Linear Mode
