Looking for a new engine

[The Monty]

Hey guys,
Well, my engine is leaking like a seive, and Ive pretty much given up.
Its going to be a head off job to fix, and I just cant be bothered, time wise and all the costs for the car have been spiralling a bit out of control.
ANYWAY,
long story short, its going to cost me $1200 to pull the head again and get it all fixed up or $395 for a new engine.
Thats the easy part.
The hard part is Im really chasing an AU XR6 HP engine.
If I cant find one, fine, so be it. If I can, awesome.
If anyone knows someone, or can find one somewhere, these are the prerequisites.
I need a cost, obviously.
It must have NO LEAKS.
It must have drove fine before I get it.

I dont care about KM's as long as its been serviced, doesnt leak and runs well.
Let me know what you can dig up.
Thanks
Josh

[sleeper393]

http://www.boostcruising.com/forums/...owtopic=586460,
its a vct engine though

[Jastel]

I threw an AU engine in the dump a few weeks back
The wreckers didn't even want it for free

[sleeper393]

Originally Posted by The Monty

Hey guys,
Well, my engine is leaking like a seive, and Ive pretty much given up.
Its going to be a head off job to fix, and I just cant be bothered, time wise and all the costs for the car have been spiralling a bit out of control.
ANYWAY,
long story short, its going to cost me $1200 to pull the head again and get it all fixed up or $395 for a new engine.
Thats the easy part.
The hard part is Im really chasing an AU XR6 HP engine.
If I cant find one, fine, so be it. If I can, awesome.
If anyone knows someone, or can find one somewhere, these are the prerequisites.
I need a cost, obviously.
It must have NO LEAKS.
It must have drove fine before I get it.

I dont care about KM's as long as its been serviced, doesnt leak and runs well.
Let me know what you can dig up.
Thanks
Josh

http://www.fordprospares.com.au/
NEW STOCK

2002 ford Falcon AUIII XR6, 4.0L, 5 Spd Manual, Low Kms, Tidy car, NOW WRECKING FOR PARTS ONLY, CALL NOW.

[Cam]

Originally Posted by The Monty

It must have NO LEAKS.

Now's the time to sell your shares in sikaflex, if Josh has no leaks to patch up they WILL go under..SELL SELL SELL

[The Monty]

Lol, you know it cam. Sleeper, thanks heaps, but I didnt want VCT. And thanks heaps for the HP link, Ill be onto them in the morning.

[The Monty]

The VCT engine in the link on the hp engine they want $550 for it, which is a really good price, and actually a very cheap power upgrade for someone if they were willing to do it.

[JC]

Why a HP engine? As far as I know, internals are the same as the stock motor, with only exhaust being the difference to free up the big 7kw difference.

[sleeper393]

dont the hp engine run a different cam and ecu settings, to standard intech ?

[Racecraft]

you only want a bottom end though don't you to keep your ported head?

[sleeper393]

Originally Posted by The Monty

Lol, you know it cam. Sleeper, thanks heaps, but I didnt want VCT. And thanks heaps for the HP link, Ill be onto them in the morning.

monty to put the hp engine in , do you have to get the ecu aswell , or will it run on the standard ecu , as the xr engine runs a different cam and ecu yes ? ?

[The Monty]

I want the HP engine, as it has different cam, and different head.
Tibbo, I wasnt going to keep the head and cam combo, go for something with more down low poke, and less up high so I can drop my rev limiter back under 6200 rpm, lol.
Sleeper, not sure about the ECU, but it wouldbe getting flashed tuned, so I dont think I would need it.
And JC, a "Big 7kw difference" comment, not really justified. Tripowers car, standard HP cam and head, 14.2.
Stiddy, exhaust and intake, 14.9
Its always been known to be a MUCH better engine.

[StealthAu]

Originally Posted by The Monty

I want the HP engine, as it has different cam, and different head.
Tibbo, I wasnt going to keep the head and cam combo, go for something with more down low poke, and less up high so I can drop my rev limiter back under 6200 rpm, lol.
Sleeper, not sure about the ECU, but it wouldbe getting flashed tuned, so I dont think I would need it.
And JC, a "Big 7kw difference" comment, not really justified. Tripowers car, standard HP cam and head, 14.2.
Stiddy, exhaust and intake, 14.9
Its always been known to be a MUCH better engine.

Much better cam maybe, everything else is the same, including the head.

[Road Games]

Lets put a BARRA in it mate , my mods + your mods = 12 sec vehicle !!



Pm is your friend , i have a heap of new info since Brocky ran that awsome ET !

[Cam]

I think if he wanted to put a barra in it, he'd buy a certain EB with a BF engine in it and swap his gears etc into it.. well, my thoughts anyway... Would be a weapon..

Hopefully he doesn't find an engine this weekend, I don't feel like doing an engine swap this weekend, hahaha... Dazzler, seeing as your offering to help but a barra in it, wanna come help put the HP into it? :P

Also, can anyone else confirm what StealthAu said? If so, the cam must really be suited to these engines.. I think with Josh's stallie, and diff gears it'd certainly be quick. Not to mention have some decent down low poke..

[Road Games]

Originally Posted by Cam

Would be a weapon..

Hopefully he doesn't find an engine this weekend, I don't feel like doing an engine swap this weekend, hahaha... Dazzler, seeing as your offering to help but a barra in it, wanna come help put the HP into it? :P

Yeah suppose , i got next weekend off completely...

[Cam]

ok, sounds like a plan! I will cancel the plans I had, that I wanted to cancel anyway...

Josh, your engine swap is happening next weekend. Now, find an engine, engine crane, air compressor, and rattle gun..

[sleeper393]

Originally Posted by The Monty

I want the HP engine, as it has different cam, and different head.
Tibbo, I wasnt going to keep the head and cam combo, go for something with more down low poke, and less up high so I can drop my rev limiter back under 6200 rpm, lol.
Sleeper, not sure about the ECU, but it wouldbe getting flashed tuned, so I dont think I would need it.
And JC, a "Big 7kw difference" comment, not really justified. Tripowers car, standard HP cam and head, 14.2.
Stiddy, exhaust and intake, 14.9
Its always been known to be a MUCH better engine.

how did you go regarding that hp engine in n.s.w ??

[Road Games]

Originally Posted by Cam

ok, sounds like a plan! I will cancel the plans I had, that I wanted to cancel anyway...

Josh, your engine swap is happening next weekend. Now, find an engine, engine crane, air compressor, and rattle gun..

Me-thinks he should wait till the 23rd i have the whole week off .... and working on his saves me spending money on mine

[Racecraft]

Monty, PM me, i am about to pART OUT thE xr6 YOU GOT THE HEADLIGHT SWITCH FROM.. xr6 5 SPEEDER WITH ??? kmls on her...

A deal could be done with your time and my 'asset'

[The Monty]

Originally Posted by sleeper393

how did you go regarding that hp engine in n.s.w ??

$750 plus delivery :(

[sleeper393]

would have been alright if it was up your way , as per the pic it looked a clean donk !

[The Monty]

The whole car was very clean. It also had the 1/4 panels I was after that he was going to throw in for $200.

[justa6]

go twin cam

[JC]

Originally Posted by The Monty

And JC, a "Big 7kw difference" comment, not really justified.

Standard AU engine is 157kw.
XR6 HP engine is 164kw.
There's my justification, but didn't realise cam was different (always thought it was just exhaust and tune).

Anyway, was just interested to know why - but if you can get one for around similar money to a standard engine, then why not.

Have fun with it; engine swaps are always so much.....fun!

[T3man]

You're right JC - 7kW difference - WOW, like that's noticeable.

The only thing that is significantly different between them is the ECU map. Especially the auto one which has quite different shift control. When I did the conversion on mine there was absolutely no difference in performance until I put the ECU in - then it really livened up and it was mainly due to quicker auto changes. So in normal day to day driving I couldn't tell the difference - but in zero to 400m through the gears is where it really came to life.

[sleeper393]

in saying , you could put the XR HP engine in a forte and run the standard ecu , without any drama's , but you need the XR ecu to gain the benefits , now in saying could i put any series 3 auto XR6 HP ecu in once you have installed the hp donk , doesn't it affect your original key's , etc , etc.

[JC]

Originally Posted by sleeper393

in saying , you could put the XR HP engine in a forte and run the standard ecu , without any drama's , but you need the XR ecu to gain the benefits , now in saying could i put any series 3 auto XR6 HP ecu in once you have installed the hp donk , doesn't it affect your original key's , etc , etc.

BEM controls security, so if you change the ECU at all, you usually have to get it paired to the BEM (or vice versa, BEM to ECU). If you want to put an AU2/3 engine in an AU1, you either have to use the AU1 engine bits like coil pack, alternator etc as they are different to AU2/3, or just replace the engine bay harness with the AU2 one, or splice in the AU2 bits you need (if you decide to use AU2 coil packs).

[sleeper393]

ahh ok , as i have a series 3 forte , if i want a series 3 xr hp engine i need the ecu and the bem to complete the package , would my keys have to be reprogramed to suit or try and get the keys that came from the donor car ?
sorry for all the questions , if these have been posted before .

[sleeper393]

[QUOTE=JC]Standard AU engine is 157kw.
XR6 HP engine is 164kw.
There's my justification, but didn't realise cam was different (always thought it was just exhaust and tune).

Anyway, was just interested to know why - but if you can get one for around similar money to a standard engine, then why not.

Have fun with it; engine swaps are always so much.....fun![/
CAMSHAFT LOBE LIFT
INLET-
standard 6.271mm
hp 6.743mm
vct 6.717mm
EXHAUST-
standard 6.715mm
hp & vct 6.434mm
if all this really matters