|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-10-2010, 11:00 PM
|
#1 | ||
|
Now in the quad cam zone
Join Date: May 2008
Location: SE QLD Brisbane
Posts: 2,827
|
a mate at work has an AU forte (think its series 2) and as soon as he turns the car on, the thermos run non stop... he has also mentioned the temp guage has stopped working... i cant really tell you much more sorry..
my guess was its something to do with the guage not working so as a fail safe the fans remain on? any ideas that i can pass onto him so he can get it sorted? cheers
__________________
SOLD!  "BARNEY" 2003 BA GT #332, Phantom, Boss 290, FR20 Simmons.  XYZ Brakes - 355mm Rotors - 8piston Front Calipers & 4piston Rear More Mods soon!!  
|
||
|
|
|
07-10-2010, 11:10 PM
|
#2 | ||
|
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
Not exactly sure what type of sensor they run but the coolant temp sensor may have something to do with it.
Does the gauge move at all or is it stuck on the cold position? |
||
|
|
|
|
08-10-2010, 07:40 AM
|
#3 | ||
|
Now in the quad cam zone
Join Date: May 2008
Location: SE QLD Brisbane
Posts: 2,827
|
I will ask when I see him but I think he mentioned it stays on cold
__________________
SOLD! "BARNEY" 2003 BA GT #332, Phantom, Boss 290, FR20 Simmons. XYZ Brakes - 355mm Rotors - 8piston Front Calipers & 4piston Rear More Mods soon!!
|
||
|
|
|
|
08-10-2010, 07:43 AM
|
#4 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 245
|
I had the same problem in an EF with the thermo's on full when the ignition was switched on, i took the car to a sparky and the problem was diagnosed as
Carried out scan test and found faults in inhibitor switch, transmission fluid sensor and low voltage circuits. Also found earth output from terminal 91 at the ecu but not at the transmission. By pass wire from engine to transmission circuit. Fans were ok. |
||
|
|
|
asking this for a friend
Linear Mode
