|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-04-2012, 06:17 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Brisbane
Posts: 1,029
|
Have just refitted the dash back into the XR and now fitting the fairmont leather interior. Hooked the battery back up and everything seems to be right except fpr the central locking.
You press the remote and the lights flash twice and then the horn goes off like if a door is not closed. The indicator on the dash for the doors is working and goes off when all door are closed. Also if you try to lock the car manually, only the driver's door locks and no actuators work on the other doors. It all worked fine before I pulled everything apart. Any input woud be great!!
__________________
We salute those brave souls that enter the DARK side |
||
|
|
|
18-04-2012, 06:46 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Brisbane
Posts: 1,029
|
Well finally found the problem with the central locking. After getting frustrated trying to solve this problem, had another go this afternoon. Found out that when you tried to lock the car the BEM clicked on/off 3 times. Also found that the boot release worked fine. Also today when you tried to lock the car, it would only flash once where the other day it flashed twice and the horn went off.
Checked all the wire connections and found that I had not pulled the plactic lever clip over the main wiring connection in the Driver's side footwell. Did this and now everything works as it should. The connection must have not been pressed into each other all the way. Shows that the simplest thing can annoy the hell out of you!!!
__________________
We salute those brave souls that enter the DARK side |
||
|
|
|
Central Locking Not Working on AU1
Linear Mode
