Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 02-11-2005, 09:41 PM   #1
csv8
FF.Com.Au Hardcore
 
csv8's Avatar
 
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,318
Default MITSU 380 Cracking Up

"Car maker Mitsubishi has been forced to replace the driver's door gass in some of its new 380 sedans because of spontaneous fractures.
Spokesman Kevin Taylor said the company experienced 20 such incidents in company cars or cars still held in stock. No glass failures had been reported in cars sold to the public.
But Mr Taylor said the company had identified a problem with a batch of vehicles and was replacing the glass when necessary." The Courier Mail Nov 2.
Not a good start for a company pushing the best built car in Australia.
I hope there are no other faults with this car.
The car needs a fair go.

csv8 is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 09:50 PM   #2
AUXRVIII
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 1,463
Default

That's the second recall they've had with the car. I don't think they can afford to have this car to fail.
AUXRVIII is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 09:56 PM   #3
LUXO_8
windsor user
 
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
Default

better built better backed is their motto..... i bet its fixed quick-smart.



there are always glitches in a new model.....
LUXO_8 is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 10:21 PM   #4
SpoolMan
Solution Was Boost 4?, 6 & 8
 
SpoolMan's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
Chairman's Award: Chairman's Award - Issue reason: The exceptional contribution made to AFF events and sponsorship. Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Everything you do to help this place run smoothly! Technical Contributor: For members who share their technical expertise. - Issue reason: The awesome Technical and Service how to's in the FPV /XR6 /G6ET turbo threads..  and his own build threads that inspire people to have a go... enabling people to save money and realise the dream of working on their own cars as well. 
Default

Racv gave it a good rap.....5 out of 5 for handling & parts priceing.....
the lowest score was 3 out of 5 for the pricing of the car $34,490 for base model plus ORC..
OVERALL RATING 4 out of 5.
__________________
[SIGPIC][/SIGPIC]

AUTOTECH TUNED EDELEBROCK CHARGED
2017 GT Mustang Plenty of RWKW
SpoolMan is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 10:21 PM   #5
The CandyMan
Guest
 
Posts: n/a
Default

the performance of the 380 isnt wonderful either
  Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 10:25 PM   #6
SpoolMan
Solution Was Boost 4?, 6 & 8
 
SpoolMan's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
Chairman's Award: Chairman's Award - Issue reason: The exceptional contribution made to AFF events and sponsorship. Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Everything you do to help this place run smoothly! Technical Contributor: For members who share their technical expertise. - Issue reason: The awesome Technical and Service how to's in the FPV /XR6 /G6ET turbo threads..  and his own build threads that inspire people to have a go... enabling people to save money and realise the dream of working on their own cars as well. 
Default

Quote:
Originally Posted by The CandyMan
the performance of the 380 isnt wonderful either
175kw@5250 rpm..... 16.0 for the Auto 400 meters.... 0 to 100 8.3 sec.. :gren:
__________________
[SIGPIC][/SIGPIC]

AUTOTECH TUNED EDELEBROCK CHARGED
2017 GT Mustang Plenty of RWKW
SpoolMan is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 10:26 PM   #7
LUXO_8
windsor user
 
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
Default

Quote:
Originally Posted by XRFPV8
175kw@5250 rpm..... 16.0 for the Auto 400 meters.... 0 to 100 8.3 sec.. :gren:
not overly bad for a family car...... what are they like on fuel??
LUXO_8 is offline   Reply With Quote Multi-Quote with this Post
Old 02-11-2005, 10:39 PM   #8
SpoolMan
Solution Was Boost 4?, 6 & 8
 
SpoolMan's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
Chairman's Award: Chairman's Award - Issue reason: The exceptional contribution made to AFF events and sponsorship. Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Everything you do to help this place run smoothly! Technical Contributor: For members who share their technical expertise. - Issue reason: The awesome Technical and Service how to's in the FPV /XR6 /G6ET turbo threads..  and his own build threads that inspire people to have a go... enabling people to save money and realise the dream of working on their own cars as well. 
Default

Quote:
Originally Posted by MADNC_8
not overly bad for a family car...... what are they like on fuel??
The 380 weighs in at 1665 kg...Auto 12.1 litres/100km.....
.
I drove a stock standard BA XT Auto at Heathcote 400 meters 15.5 @ 93 mph...
__________________
[SIGPIC][/SIGPIC]

AUTOTECH TUNED EDELEBROCK CHARGED
2017 GT Mustang Plenty of RWKW
SpoolMan is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 12:06 AM   #9
XR Martin
FF.Com.Au Hardcore
 
XR Martin's Avatar
 
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,056
Default

Wheels mag did get 15.3 out of a manual 380.
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170

2004 BA wagon RTV project.

1998 EL XR8, Auto, Hot Chilli Red

1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired

1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project.
XR Martin is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 12:13 AM   #10
MITCHAY
FF.Com.Au Hardcore
 
Join Date: Apr 2005
Location: Canberra
Posts: 13,465
Default

Quote:
Originally Posted by XRFPV8
The 380 weighs in at 1665 kg...Auto 12.1 litres/100km.....
.
I drove a stock standard BA XT Auto at Heathcote 400 meters 15.5 @ 93 mph...
Isnt 12.1lts/100km a bit steep? I though the Falcon and Commodore were around the 11lt mark?
MITCHAY is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 12:20 AM   #11
SSBUB
SSuper SSpy
 
SSBUB's Avatar
 
Join Date: Oct 2005
Location: WA
Posts: 607
Default

they are a bit thirsty...i hope mitsi have some success with this car, they really need to...last time i drove a magna the steering wheel was in the way of the dash cluster, no matter which way i moved the seat and wheel i could never see all of the speedo...anyone else have that problem with the last mitsi series? We had heaps of em as govvy cars...i ended up reversing one into a gate and it cost 1300 to replace the bumper...thankfully it wasnt my bill...the replacement govvy car? a hyundai accent hahaha
SSBUB is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 09:29 AM   #12
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by csv8
"Car maker Mitsubishi has been forced to replace the driver's door gass in some of its new 380 sedans because of spontaneous fractures.
Spokesman Kevin Taylor said the company experienced 20 such incidents in company cars or cars still held in stock. No glass failures had been reported in cars sold to the public.
But Mr Taylor said the company had identified a problem with a batch of vehicles and was replacing the glass when necessary." The Courier Mail Nov 2.
Not a good start for a company pushing the best built car in Australia.
I hope there are no other faults with this car.
The car needs a fair go.
I hope this problem is not a reflection of the amount of flex in the car and structural rigidity, or lack there of....



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 09:35 AM   #13
4.9 EF Futura
Official AFF conservative
 
4.9 EF Futura's Avatar
 
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 3,549
Default

Quote:
Originally Posted by 4Vman
I hope this problem is not a reflection of the amount of flex in the car and structural rigidity, or lack there of....
I understand the glass manufacturer has claimed responsibility

http://www.theadvertiser.news.com.au...5E2682,00.html

Quote:
The problem has been traced by Pilkington Glass to a weakness or "stress line" in a small batch of windows supplied to Mitsubishi.
Apparantley none of the affected cars had been sold.

But still.... throw enough sh..... er, mud, at a product and some of it will stick... C'mon mitsis, get those things selling!!!!
__________________
A cup half empty... but full of euphoria.
4.9 EF Futura is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 11:24 AM   #14
Citric GT
Its yellow, NOT green!
 
Citric GT's Avatar
 
Join Date: Feb 2005
Location: Hunter Valley
Posts: 1,219
Default

Its good to see they're still using Pilkington aussie glass. I heard that Ford are using chinese glass in the Falcon. Is it true?
__________________
EL XR8 sedan - low & loud
FG XR6 Turbo ute - Auto & Lux pack
Citric GT is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 11:29 AM   #15
paulvdb
Regular Member
 
Join Date: Jan 2005
Location: NW Sydney
Posts: 234
Default

I think that this is more of an issue for Pilkington than for Mitsu. The Aussie glass manufacturers were trying to convince GMH that they could make glass as well as anyone overseas and GMH didn't believe them. The VE will have overseas glass as a result.
paulvdb is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 11:47 AM   #16
4.9 EF Futura
Official AFF conservative
 
4.9 EF Futura's Avatar
 
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 3,549
Default

Quote:
Originally Posted by Citric XR6
Its good to see they're still using Pilkington aussie glass.
Pilkington is a UK company listed on the London Stock Exchange.

I do agree tho that its good to see them use glass made in australia and help keep about 1600 people in the job!
__________________
A cup half empty... but full of euphoria.
4.9 EF Futura is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 12:07 PM   #17
vztrt
IWCMOGTVM Club Supporter
 
vztrt's Avatar
 
Join Date: Sep 2005
Location: Northern Suburbs Melbourne
Posts: 17,799
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: vztrt is one of the most consistent and respected contributors to AFF, I have found his contributions are most useful to discussion as well as answering members queries. 
Default

Quote:
Originally Posted by Citric XR6
Its good to see they're still using Pilkington aussie glass. I heard that Ford are using chinese glass in the Falcon. Is it true?
All I know the branding on my glass says SFH. So I have no idea where it comes from.
vztrt is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 01:29 PM   #18
Valknutr
Regular Member
 
Valknutr's Avatar
 
Join Date: Mar 2005
Posts: 330
Default

well thats what happens when people are fed up with a certain car maker and throw rocks through windows
__________________
car that goes (just) <----- gonna be MENACE so :thebirds:
Valknutr is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 04:18 PM   #19
smoo
FF.Com.Au Hardcore
 
smoo's Avatar
 
Join Date: Jan 2005
Posts: 3,446
Default

Quote:
Originally Posted by XRFPV8
175kw@5250 rpm..... 16.0 for the Auto 400 meters.... 0 to 100 8.3 sec.. :gren:
Don't listen to Wheels, they can't get good times at all. NZ press are getting 7.2 seconds in the autos. Can't wait to drive a manual one though.
smoo is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:03 PM   #20
AUXRVIII
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 1,463
Default

Quote:
Originally Posted by vztrt
All I know the branding on my glass says SFH. So I have no idea where it comes from.
I've been told it is China.
AUXRVIII is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:30 PM   #21
SpoolMan
Solution Was Boost 4?, 6 & 8
 
SpoolMan's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
Chairman's Award: Chairman's Award - Issue reason: The exceptional contribution made to AFF events and sponsorship. Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Everything you do to help this place run smoothly! Technical Contributor: For members who share their technical expertise. - Issue reason: The awesome Technical and Service how to's in the FPV /XR6 /G6ET turbo threads..  and his own build threads that inspire people to have a go... enabling people to save money and realise the dream of working on their own cars as well. 
Default

Quote:
Originally Posted by smoo
Don't listen to Wheels, they can't get good times at all. NZ press are getting 7.2 seconds in the autos. Can't wait to drive a manual one though.
RACV is our motoring body here in Victoria, these Stats came from the monthly Mag....Racv did the most of the testing at Calder Park raceway..
__________________
[SIGPIC][/SIGPIC]

AUTOTECH TUNED EDELEBROCK CHARGED
2017 GT Mustang Plenty of RWKW
SpoolMan is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:44 PM   #22
MAD
Petro-sexual
 
MAD's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 4,527
Default

Quote:
Originally Posted by 4.9 EF Futura
But still.... throw enough sh..... er, mud, at a product and some of it will stick... C'mon mitsis, get those things selling!!!!
I dont think it will affect them that much, considering its been put out in the light straight away and no customers have had to deal with the isuue, yet.
Remeber all the trouble the typhoon had, they have recovered well from that.

I hope mitsu dont have too many more troubles, from having the ex general manager bagging them and various other media's giveing them a bit of stick, I really hope they stick it up em.

Any company that pushes to use australian made goods should be cheered.
__________________
EL Fairmont Ghia - Manual - Supercharged
- The Story
MAD is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:47 PM   #23
LUXO_8
windsor user
 
Join Date: Dec 2004
Location: Geelong
Posts: 13,123
Default

i had a close look at one today, they look damn good.....
would have to say it "should" give the camry little bit of a scare.....
LUXO_8 is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:53 PM   #24
Franky
Bring back the Phase
 
Franky's Avatar
 
Join Date: Dec 2004
Location: Portland, Vic
Posts: 884
Default

yeah it's a minor issue, one they will hopfully clear up.

On a good note apparently they are harder to steal than the Falcon and Commodore which is always a good thing
Franky is offline   Reply With Quote Multi-Quote with this Post
Old 03-11-2005, 10:57 PM   #25
Dave_au
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Location: Northern Sydney
Posts: 1,908
Default

Quote:
Originally Posted by Franky
On a good note apparently they are harder to steal than the Falcon and Commodore which is always a good thing
True, and I don't think it's inherent risk in getting stolen would be very high - its not an Evo/Clubsport/Sti/M3!!!!
Dave_au is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2005, 02:17 PM   #26
Steve D
Irregular Member
 
Steve D's Avatar
 
Join Date: Sep 2005
Location: Glen Waverley, Vic
Posts: 356
Default

Yesp, the Falcon's glass comes from China. I think it changed at the AU introduction.
Steve D is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2005, 02:24 PM   #27
henry 351
Punch it baby, punch it.
 
henry 351's Avatar
 
Join Date: Oct 2005
Location: Working hard. If you work hard you get the goodies.
Posts: 581
Default

The new 380 may be harder to steal, but I think its a case of would you want too??? It certainly wouldn't be for a "joy" ride..

Good luck to Mitsubishi, a lot of jobs depend on this car.
__________________
"Sweat saves blood. Blood saves lives. Brains save both" Erwin Rommel.
henry 351 is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2005, 06:49 PM   #28
AU-MUSTD
Flat floor shifter
 
AU-MUSTD's Avatar
 
Join Date: Jan 2005
Location: swappers xing
Posts: 504
Default

Quote:
Originally Posted by MADNC_8
i had a close look at one today, they look damn good.....
would have to say it "should" give the camry little bit of a scare.....

I was very dissapointed when l checked one out in the flesh. They have the same clumsy stance that the au had ( Tall , thin looking and doesnt sit on the road nice) especially the rear end and the interier fit and finish was very very poor. The only thing l liked was the seat cushioning and the dash rubber.
AU-MUSTD is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2005, 07:02 PM   #29
RED_EL_XR8
Banned
 
RED_EL_XR8's Avatar
 
Join Date: Dec 2004
Location: Not suffering Fools Gladly!!
Posts: 2,864
Default

Quote:
Originally Posted by Franky
On a good note apparently they are harder to steal than the Falcon and Commodore which is always a good thing
It's not so much they are harder to still its more that the get-away takes much much longer!! :hihi:
RED_EL_XR8 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:12 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL