|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
23-11-2005, 09:29 AM
|
#1 | ||
|
Cookie Monster
Join Date: Sep 2005
Location: Sydney
Posts: 371
|
Hi Guys,
My Au 2 XR8 on the odd occasion will get vey rough on the 1-2 shift. It happens at light throttle applications and it feels as if the car is not going anywhere when it is about to thump into 2nd. I understand this is a problem with the 4 speed auto and there is a ford ecu software flash that supposedly fixes it. It is very annoying as it is a fair thump in the driveline when it occurs. I am reluctant to get ford to flash the ecu before I know what the story is. Could anyone out there shed some light on this if they have the issue or if they have the solution.  Cheers Engineer |
||
|
|
|
23-11-2005, 02:13 PM
|
#2 | ||
|
BA Xr8
Join Date: Feb 2005
Location: NZ
Posts: 917
|
Hello engineer, I also have a 200kw AUII XR8 auto. The ruff gearshift I had was during the down change from 2-1. Driving around car parks etc was typically a very unrefined experience. The ECU upgrade or re-flash improved the problem by about 95%. It still does the occasional ruff downchange but nowhere as bad nor anywhere as often. Other than the improved smoothness I didn't notice any other change to the cars performance. The reflash was a factory recall so shouldn't cost you any money yourself.
|
||
|
|
|
|
23-11-2005, 04:33 PM
|
#3 | ||
|
Regular Member
Join Date: Mar 2005
Posts: 216
|
Engineer your problem could be low transmission oil, does it do it more when cold?
|
||
|
|
|
|
23-11-2005, 04:59 PM
|
#4 | ||
|
Giddy up.
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,639
|
I to have an AU II XR8 but as like what SBCB say's it does this on the down shift, 2-1, but I just take it easy and it seem's to be allright, or when driving in town I leave it in 3rd and it seem's to be allright, what mode do you have the tramission in?, have you tried the sport's/adtp/economy/.
|
||
|
|
|
|
24-11-2005, 09:10 AM
|
#5 | ||
|
Cookie Monster
Join Date: Sep 2005
Location: Sydney
Posts: 371
|
Hi Guys,
I have just had the transmisson serviced and it did not make much of a difference. A little I think. The problem is occasional and it is mostly on the 1-2 shift under really light throttle applications. Under normal throttle it is fine. Very very occasionally it will have a rough (but no way as rough as the 1-2 )2-1 shift. The auto has been in all modes econ/adaptive and max performance and it made no difference to the shift roughness. Currently set to max performance in the shift programming. I am guessing a valve body problem but I just thought I would get some feedback from you guys. Cheers Engineer |
||
|
|
|
4 speed 1-2 shift clunk
Linear Mode
