Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 16-10-2006, 08:19 PM   #1
FRANCIS220
Starter Motor
 
Join Date: Mar 2006
Posts: 23
Default is my au2 xr8 a series 3 spec

hi all i have a late model series 2 xr8 with 220 motor i have noted that the body kit is the same as a series 3 xr6 does this mean my car is practically a series 3 spec, there must have been a au 2 and a half or something because my car has skirts where the first series 2's did not. maybe a running change due to intro of the 220 motor.

FRANCIS220 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 08:22 PM   #2
Cheahman
BOSS 260
 
Cheahman's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 325
Default

Is it a XR8 Rebel? I know they had the series 3 kit.
__________________
"And I gave that man directions, even though I didn't know the way, because that's the kind of guy I am this week." Homer

BA XR8
EB XR8
Cheahman is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 08:25 PM   #3
FRANCIS220
Starter Motor
 
Join Date: Mar 2006
Posts: 23
Default

no just a bog standard au2 xr8 220
FRANCIS220 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 10:25 PM   #4
fomoco3628
Regular Member
 
fomoco3628's Avatar
 
Join Date: Jul 2006
Location: Hervey bay
Posts: 82
Default

is it second hand cos if it is the first owner might of put on the bodykit to look like a series 3
fomoco3628 is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 01:05 AM   #5
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by FRANCIS220
hi all i have a late model series 2 xr8 with 220 motor i have noted that the body kit is the same as a series 3 xr6 does this mean my car is practically a series 3 spec, there must have been a au 2 and a half or something because my car has skirts where the first series 2's did not. maybe a running change due to intro of the 220 motor.
Got a photo of it? ould be handy to see which skirts etc you are talking about. There are 2 versions for the series 2/3, apart from the version with no skirts. There's the Ford racing kit, and the Rebel kit.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 04:49 AM   #6
Whoosha
AU DIE HARD
Donating Member1
 
Whoosha's Avatar
 
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the things you do behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by FRANCIS220
hi all i have a late model series 2 xr8 with 220 motor i have noted that the body kit is the same as a series 3 xr6 does this mean my car is practically a series 3 spec, there must have been a au 2 and a half or something because my car has skirts where the first series 2's did not. maybe a running change due to intro of the 220 motor.

I brought mine new in the second last week in september before the order went in the up grade was made So i changed a few things s11 pre upgrade was a 200mtr. no body kit standard only optioned.after the upgrade 220 mtr was made avalible at a cost $1200 from memory. side skirts the same as the series 3 sr /f/mont were standard. the Xr side skirts ( they cover the base & lower bit of the gaurds) and rear bar skirt/ front pods were a option as was the Rebel / S3 race body kit on the S3s.. how ever the rebel body kit was being supplyed by some dealers on the S2 for $2000 extra..
the last of the S3s both sedans. and utes had a heap of body kits fitted by the dealers to off load them before the BA release . most of the dealer body kit had self tappers holding the front pods on, the factory fitted ones used large pop rivetts hopes this helps Cheers .Whoosha
P.S Ive had 6 AU XRs in the family Both new & secondhand so you can trust me :thebirds:
__________________

........Age and treachery will ALWAYS overcome youth and skill.......


CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd


.............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES...
..................................................

Quote:
Originally Posted by Riksta
Quote of the weekend: "The quarter mile wasn't as long as I expected it to be".
Whoosha is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 09:08 AM   #7
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

What is the build date ... surely someone on here knows the exactly dates for each series ... it should tell you on the compliance plate.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 05:47 PM   #8
FRANCIS220
Starter Motor
 
Join Date: Mar 2006
Posts: 23
Default

thanx whoosha mine looks exactly like yours thanks for your help
FRANCIS220 is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 05:53 PM   #9
Smoke Pursuit
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 22,928
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: DASH/bfiipursuit has been alot of help over the years I have frequented this forum, lots of thoughtful and informed posts, very much a valued contributor. 
Default

Series III kit wasnt available on Series II unless ofcourse the dealer put the Havoc option on it.

Which was a late Series II option.

Series II changed in APRIL / MAY 2001, got color coded mirrors, lost the stadard body kit, got Forte skirts, lost stacker and lost alloy spare. Gained the 220 motor.
__________________
2022 RAM Laramie 5.7
2023.50 Ranger Wildtrak 3.0 V6 Premium Pack
2024 Everest Sport 3.0 V6 Touring Pack
2025 Mustang Darkhorse 6M Blue Ember + Appearance pack ETA April 25.
Smoke Pursuit is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 05:58 PM   #10
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

My series II is a 10/01 build ... well that's an XLS ute though ... I am presume all models changed at the same time though.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 08:35 PM   #11
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Mine's a 06/01 build with the 220, what's the tickford placard on the drivers side under the bonnet say? It will tell you what options were ticked, like Momo wheel, body kit etc...
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:46 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL