|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
03-12-2006, 08:18 PM | #1 | ||
fairmont ghia au 2 wagon
Join Date: Jul 2006
Posts: 37
|
today i did the led mod in my fairmont's climate control but the lights that are in the back dont light up the buttons evenly how would you get it even ?
i also did the window switches today : (thanx russellw) Last edited by fairmont au; 03-12-2006 at 08:39 PM. |
||
03-12-2006, 09:58 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 3,918
|
Try putting a drop of white out on the end of the LED to get the light to disperse properly.
|
||
03-12-2006, 11:11 PM | #3 | ||
Audi S3
Join Date: May 2005
Location: Sydney.
Posts: 8,307
|
take a piccie and show us. been thinking about this for a while. but i couldnt be stuffed.
__________________
|
||
04-12-2006, 05:42 PM | #4 | ||
fairmont ghia au 2 wagon
Join Date: Jul 2006
Posts: 37
|
i try that white out idea. ihave to get around to piccie depends on if the cameras working
|
||
04-12-2006, 09:25 PM | #5 | ||
AU2 XR8
Join Date: Dec 2005
Posts: 163
|
try to file the ends of the LEDS flat it will make the light disperse more evenly or you can get a small drill and drill into the end of the LEDS for the same effect
|
||