Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 20-01-2007, 11:28 AM   #1
Xerroz
AU II 75th Anniversary
 
Xerroz's Avatar
 
Join Date: Jan 2007
Location: Toowoomba, Qld
Posts: 2
Angry Air bag light & Steering wheel controls

My Airbag light is flashing - it flashes twice then briefly stops then flashes three times. After driving for a while it sometimes stays on and sometimes just stops. The horn is not working and neither are the radio control buttons on the steering wheel. I have checked wiring harnesses which seem to be ok and no fuses are blown. Anybody, any ideas??

Xerroz is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 11:50 AM   #2
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Welcome to the forums

It sounds like you need a new clock spring, pull the airbag and steering wheel off and see if the ribbon cable underneath has come undone.
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 12:21 PM   #3
Xerroz
AU II 75th Anniversary
 
Xerroz's Avatar
 
Join Date: Jan 2007
Location: Toowoomba, Qld
Posts: 2
Default

Thanks, i'll try that. Is there much chance that i will accidentally set off the air bag? I haven't pulled the steering wheel of an airbag equipped car before.
Xerroz is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 12:27 PM   #4
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

If the clock sping is in fact stuffed then as a precaution I would disconnect the battery, and leave it off for 5 mins before starting to pull the airbag off.

By the way you need a special bit to get the airbag off, it's a 5 sided security torx bit, or you can use a flat blad screw driver with a notch taken out of the middle
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 02:41 PM   #5
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

If an airbag light flashes .. the airbag system has been disabled to start off with ... you still do need to be careful with it though ... as a precaution disconnect the battery.

But I have seen Ford airbag equipped wheels been removed many a time without having to have the battery disconnected.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 03:55 PM   #6
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Yes I have done it many times without disconnecting the battery.
However if the ribbon cable has come undone it would be very easy for 12 volts from say the horn circuit to find its way into the airbag... boom.
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2008, 12:25 AM   #7
Cooper69S
Regular Member
 
Cooper69S's Avatar
 
Join Date: Apr 2005
Location: Bunbury WA
Posts: 464
Default

bit of thread-mining here...
but i'm interested in the comments about the ribbon cable coming undone. I've bought a momo wheel and need to fit it but was planning on buying a new clock spring first as i'd been told its the cause of the airbag light+no audio controls+no horn thing.
If it could be just the cable loose then I wouldn't want to waste money on a new clock spring.
the symptoms i had were that the audio controls on the steering wheel became a bit intermittent then after a few weeks stopped working altogether. dunno when the horn stopped as i rarely use it. The airbag light issue didn't start until a coupla months later.
Does that sound like a stuffed clock spring, or a loose cable? or could it be either?
I spose i might just have to pull the airbag off and see but i didn't want to have to do it twice...
Cooper69S is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2008, 11:18 PM   #8
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Yes it sounds like the clock spring to me. It's not actually a clock spring like the days of old, but rather a ribbon cable that's wound around in a circle so as to allow the steering wheel to move without losing connectivity.

The ribbon separates and the wires begin to touch.
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 05:46 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL